You are here: Home > Anchors > Expansion Shield Anchors > Double Expansion

Double Expansion Anchors, Zamac Alloy


A 4 part anchor - a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into one unit. The shields are connected by a pair of spring bands. At one end is the nut and at the other the cone, each designed so as to not turn during expansion. For use in soft masonry and also harder materials such as stone, brick, concrete or block. Used with machine screws or bolts which are exposed to vibration or side pressure. As the anchor sets, the opposite ends pull towards each other causing the elongation of the anchor body. It doesn't fracture and allows for a fastening of any length.



Sort By:
AN006-1420X1X12-001200 Anchors Expansion Shield Anchors Double Expansion AN006-14-000150 Anchors Expansion Shield Anchors Double Expansion AN006-51618X114X58-000800 Anchors Expansion Shield Anchors Double Expansion



AN006-516-000100 Anchors Expansion Shield Anchors Double Expansion AN006-3816X112X34-000400 Anchors Expansion Shield Anchors Double Expansion AN006-38-000050 Anchors Expansion Shield Anchors Double Expansion



AN006-1213X2X78-000280 Anchors Expansion Shield Anchors Double Expansion AN006-12-000050 Anchors Expansion Shield Anchors Double Expansion AN006-58-000025 Anchors Expansion Shield Anchors Double Expansion



AN006-34-000020 Anchors Expansion Shield Anchors Double Expansion

   
 

(CLANCAAESTDB)