Aspen Fasteners Category Index

Inch Standard Fasteners
Anchors
  > Drop-In Anchors
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
  > Expansion Shield Anchors
    • Double Expansion
    • Expansion Pin
    • Single Expansion
  > Hammer Drive Anchors
    • Flat Countersunk Head
    • Mushroom Head
      > Nylon Body / Steel Pin
      > Zamac Body / Stainless Steel Pin
      > Zamac Body / Steel Pin
    • Round Head
  > Hollow Wall Anchors
    • Drive Style
      > C1008-C1010 Steel
      > Extra Short
      > Long
      > Short
    • Extra Long
    • Extra Short
    • Long
    • Short
  > Lag Screw Shield Anchors
    • Long
    • Short
  > Sleeve Anchors
    • Acorn Sleeve
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Flat Countersunk Head
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Flat Phillips/Slot Combo Drive
    • Hex Nut Sleeve
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Rod Hanger
    • Round Head
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Threshold Flat Head
  > Split Drive Anchors
    • Flat Countersunk Head
    • Round Head
    • Tie Wire
  > Toggle Bolts and Wings
    • Mushroom Head, Combination Slot/Phillips Drive
    • Round Head, Combination Slot/Phillips Drive
  > Toggle Wings
  > Wallboard, Shield, and Other Anchors
    • Lead Wood Screw Anchors
    • Machine Screw Anchors
    • One Step Wallboard Anchors
      > Nylon
      > Zamac #3 Zinc Alloy
  > Wedge Anchors
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
Bolts
  > Battery Bolts
  > Bent Anchor Foundation Bolts
    • Steel, Hot Dip Galvanized
    • Steel, Plain
  > Carriage Bolts
    • Flat Head
      > A307 Steel, Zinc
    • Round Head, Ribbed Neck
    • Round Head, Short Square Neck
    • Round Head, Square Neck
      > A307 Steel, Black Oxide
      > A307 Steel, Hot Dip Galvanized
      > A307 Steel, Plain
    • Undersized Body
    • Full Body
      > A307 Steel, Zinc
    • 6" Thread Length
    • Full Thread
    • Part Thread
      > AISI 304 Stainless Steel (18-8)
      > Grade 5 Steel, Plain
    • 6" Thread Length
    • Full Thread
      > Grade 5 Steel, Zinc
    • Full Thread
    • Part Thread
      > Grade 8 Steel, Yellow Zinc
  > Elevator Bolts
    • Steel, Plain
    • Steel, Zinc Plated
  > Eye Bolts
  > Flange Bolts
    • AISI 304 Stainless Steel (18-8)
    • Grade 8 Steel, Black Phosphate and Oil
  > Hanger Bolts
    • Full Thread
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Plain Center
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
  > Heavy Hex Bolts
    • Grade B Steel, Hot Dip Galvanized
    • Grade B Steel, Plain
    • Grade B Steel, Zinc Plated
    • Grade B7 Steel, Plain
  > Heavy Hex Bolts Structural
    • Steel, Hot Dip Galvanized
    • Steel, Plain
  > Machine Bolts
    • Hex Head
      > A307 Steel, Hot Dip Galvanized
      > A307 Steel, Plain
    • Undersized Body
    • 6" Thread Length
    • Full Thread
    • Part Thread
      > A307 Steel, Zinc
    • Standard Threading
    • Undersized Body
    • Full Thread
      > Grade 5 Steel, Plain
      > Grade 5 Steel, Yellow Zinc
      > Grade 5 Steel, Zinc
      > Steel, Hot Dip Galvanized
    • Square Head
      > A307 Steel, Plain
    • Standard Threading
    • Full Thread
      > A307 Steel, Zinc
    • Full Thread
    • Full Body
  > Plow Bolts
    • Dome Head
      > Grade 5 Steel, Plain
      > Grade 5 Steel, Zinc
      > Grade 8 Steel, Plain
    • 1-1/2" Grip Length
    • Full Thread
    • 1-3/4" Thread Length
    • Part Thread
      > Grade 8 Steel, Yellow Zinc
      > Grade 8 Steel, Zinc
      > Grade 9 Steel, Plain
    • Part Thread
    • 4" Thread Length
    • with Raised Shoulder
    • Full Thread
    • Flat Head
      > #3 Head
    • Grade 8 Steel, Plain
    • Part Thread
    • Full Thread
    • Grade 5 Steel, Zinc
    • Part Thread
    • Full Thread
    • Grade 5 Steel, Plain
    • Part Thread
    • Full Thread
    • Grade 8 Steel, Zinc
    • Part Thread
    • Full Thread
    • Grade 5 Steel, Yellow Zinc
    • Part Thread
    • Full Thread
    • Grade 8 Steel, Yellow Zinc
    • Part Thread
    • Full Thread
      > #7 Head
  > Step Bolts
  > Structural Bolts
    • Hot Dip Galvanized
    • Plain
  > Tap Bolts
    • AISI 304 Stainless Steel (18-8)
    • Grade 5 Steel, Zinc
    • Grade 8 Steel, Yellow Zinc
    • Steel, Zinc Plated
  > Timber Bolts
  > Track Bolts
Fastening Tools
  > Hanger Bolt Driver
  > Magnetic Bit Holder
  > Magnetic Nut Setter
  > Screw Driver Bit
    • Phillips Drive
      > Insert Bit
      > Power Bit
    • Pozidriv® Alternative
      > Insert Bit
      > Power Bit
    • Reduced Phillips
    • Slotted
      > Insert Bit
      > Power Bit
    • Square Drive
      > Insert Bit
      > Power Bit
    • Torx® Alternative
      > Insert Bit
      > Power Bit
Inserts
  > Blind Threaded Inserts
    • Aluminum
      > Large Flange
    • Regular Pattern
    • Thin Wall, Ribbed
      > Small Flange
    • Thin Wall, Ribbed
    • Thin Wall
    • Stainless Steel
    • Steel
      > Large Flange
    • Regular Pattern
    • Ribbed
      > Low Profile
    • Thin Wall
      > Small Flange
    • Thin Wall, Ribbed
Nuts
  > Barrel Nuts
  > Break Away Nuts
    • Aluminum
    • Zinc Die Cast
  > Cage Nuts
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
  > Cap Nuts
    • Acorn Cap Dome Nuts
      > Closed End
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Nickel Plated
    • Washer Based
    • Alloy Steel, Plain
    • AISI 304 Stainless Steel (18-8)
      > Open End
    • Steel, Nickel Plated
    • ~Washer Based, Zinc Die Cast
  > Heavy Hex Structural Nuts
    • Type A194-2H
    • Type A563-DH
      > Medium Carbon Steel, Hot Dipped Galvanized
      > Medium Carbon Steel, Plain
    • Made in North America
  > Heavy Square Nuts
  > Hex Coupling Nuts
  > Hex Nuts
    • Hex Finished Nuts
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > AISI 316 Stainless Steel
      > Grade 5 Steel, Black Oxide
    • UNC Coarse Thread
      > Grade 5 Steel, Plain
    • Hot Formed
    • Cold Formed
      > Grade 5 Steel, Zinc
    • UNF Fine Thread
    • Imported
    • Made in U.S.A.
    • UNC Coarse Thread
    • Imported
    • Made in U.S.A.
    • Hot Formed
    • Cold Formed
      > Grade 8 Steel, Plain
    • Hot Formed
    • Cold Formed
      > Grade 8 Steel, Yellow Zinc
    • UNF Fine Thread
    • Imported
    • Made in U.S.A.
    • UNC Coarse Thread
    • Imported
    • Made in U.S.A.
    • Cold Formed
    • Hot Formed
      > Left Hand Thread
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Hot Dip Galvanized
      > Steel, Plain
    • Cold Formed
    • Hot Formed
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Made in U.S.A.
    • Imported
    • Cold Formed
    • Hot Formed
    • Hex Flange Nuts
      > Steel, Zinc Plated
    • Hex Heavy Nuts
      > AISI 304 Stainless Steel (18-8)
      > Grade 2H Steel, Hot Dip Galvanized
      > Grade 2H Steel, Plain
      > Grade 5 Steel, Zinc
      > Grade C Steel, Plain
      > Grade C Steel, Zinc
      > Grade DH Steel, Hot Dip Galvanized, Blue Wax
      > Grade DH Steel, Plain
      > Steel, Hot Dip Galvanized
    • Hot Formed
    • Cold Formed
      > Steel, Plain
    • Cold Formed
    • Hot Formed
      > Steel, Zinc Plated
    • Cold Formed
    • Hot Formed
    • Hex High Nuts
      > Standard
    • Hex Jam Nuts
      > Heavy Hex Jam Nuts
    • Grade 5 Steel, Zinc
    • Steel, Zinc Plated
    • Cold Formed
    • Hot Formed
    • Steel, Plain
    • Cold Formed
    • Hot Formed
      > Hex Jam Nuts
    • Grade 5 Steel, Zinc
    • Grade 8 Steel, Yellow Zinc
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • Cold Formed
    • Hot Formed
    • Steel, Black Oxide and Oil
    • Steel, Yellow Zinc
    • Steel, Plain
    • Cold Formed
    • Hot Formed
    • AISI 304 Stainless Steel (18-8)
    • Hex Machine Screw Nuts
      > Military Grade Fasteners
      > Regular Pattern
    • Steel, Nickel Plated
    • Steel, Plain
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • 18-8 Stainless Steel, Black Oxide
    • AISI 316 Stainless Steel
      > Small Pattern
    • Steel, Black Oxide and Oil
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • Steel, Green Zinc
    • Steel, Yellow Zinc
    • Steel, Plain
    • AISI 304 Stainless Steel (18-8)
    • Light Automotive
    • Slotted Nuts
      > Slotted Castle Nuts
      > Slotted Heavy Hex Nuts
    • Steel, Plain
    • Cold Formed
    • Hot Formed
      > Slotted Hex Nuts
    • Steel, Plain
    • Cold Formed
    • Hot Formed
    • Steel, Zinc Plated
    • Cold Formed
    • Hot Formed
    • Type 6/6 Nylon
  > Internal Wrenching Allen Nuts
    • Stainless Steel
    • Steel
  > Lock Nuts
    • 2-Way Reversible Lock Nuts
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • All Metal Prevailing Torque Lock Nuts
      > Grade-C Automation Style
    • Stover® Alternative
    • Steel, Zinc Plated and Waxed
      > Grade-G Flange Style
    • Stover® Alternative
    • Conduit Lock Nuts
    • Flex Type Lock Nuts
      > Light Hex, Full Height
    • Steel, Cadmium Plated and Waxed
    • AISI 304 Stainless Steel (18-8)
      > Light Hex, Thin Height
    • Steel, Cadmium Plated and Waxed
    • AISI 304 Stainless Steel (18-8)
    • Hex Flange Nuts with Serrations
      > AISI 304 Stainless Steel (18-8)
      > Grade 5 Steel, Zinc
      > Grade 8 Steel, Yellow Zinc
      > Steel, Black Oxide
      > Steel, Black Zinc and Baked
      > Steel, Plain
      > Steel, Yellow Zinc and Baked
      > Steel, Zinc Plated
    • Unhardened
      > Steel, Zinc Plated and Baked
    • Hex K Lock Keps Nuts
      > Free-spinning Conical Washer
      > Regular Pattern
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • Steel, Black Oxide
    • Steel, Yellow Zinc
    • 18-8 Stainless Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
      > Small Pattern
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • Hex Large Flange Nuts with Serrations
    • Hex Nylon Insert Flange Stop Lock Nuts
      > Grade 8 Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Hex Nylon Insert Stop Lock Nuts
      > Heavy Pattern
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
      > Heavy Thin Pattern
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
      > Regular Pattern
    • Grade 8 Steel, Yellow Zinc
    • Steel, Black Zinc
    • Steel, Black Oxide
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • 18-8 Stainless Steel, Black Oxide
    • AISI 316 Stainless Steel
      > Thin Pattern
    • Steel, Yellow Zinc
    • UNF Fine Thread
    • UNC Coarse Thread
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
  > Panel Nuts
  > Self-Clinching Nuts
    • Stainless Steel
    • Steel, Zinc Plated
  > Square Machine Screw Nuts
    • Steel, Black Oxide
    • Steel, Zinc Plated
  > Square Nuts
    • Regular Square Nuts
      > Steel, Hot Dip Galvanized
      > Steel, Plain
      > Steel, Zinc Plated
    • Square Machine Screw Nuts
      > Steel, Plain
    • Double Chamfered and Double Countersunk
    • Not Chamfered or Countersunk
      > Steel, Zinc Plated
    • Double Chamfered and Double Countersunk
  > Steel Spring Nuts
    • Flat Style "Speed" Nuts
      > AISI 304 Stainless Steel (18-8)
      > SAE 1050 Carbon Steel
    • Type "J" "Speed" Nuts
    • Type "U" "Speed" Clips
      > Steel, Black Phosphate and Oil
      > Steel, Zinc Plated
    • Type "U" "Speed" Nuts
  > T-Nuts
    • 3 Prong
    • 4 Prong
    • 6 Prong
  > Weld Nuts
    • Hex Type
      > 3 Projections
      > 6 Projections
    • Round Base 23/32"
    • Round Base 3/4"
      > 3 Projections
      > No Projections
    • Round Base 3/8"
    • Round Base 9/16"
    • Spot Tab Type
      > Center Hole
      > Offset Hole
    • C1006-C1010 Steel
    • AISI 304 Stainless Steel (18-8)
    • Tab Base 0.625"
    • Tab Base 0.812"
    • Tab Base 1.125"
    • Spot Type, Thin
    • Tab Type
      > 1 Projection
      > Multi Projections
      > Multi Ribbed Projections
  > Wheel Nuts
  > Wing Nuts
    • Type "A", Cold Formed, Full Body
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Plain
      > Steel, Zinc Plated
    • Type "D", Stamped
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Washer Based, Zinc Die Cast
Pins
  > Clevis Pins
  > Hitch Pins
  > Solid Dowel Pins
    • 18-8 Stainless Steel
    • Blue Devil® Brand
      > Bright Finish
      > Ebony Finish
    • Holo-Krome® Brand
      > Oversized
      > Standard
    • Unbrako® Brand
  > Spring Pins
    • Stainless Steel
    • Steel
  > Standard Cotter Pins
    • Brass
    • Stainless Steel
    • Steel, Zinc Plated
  > Vented Pull Dowel Pins
Pipe Plugs
  > Hex Socket Drive
    • BSPT Thread
    • Dry Seal
      > Alloy Steel
    • Holo-Krome® Brand
    • Blue Devil® Brand
    • Unbrako® Brand
      > Brass
    • Blue Devil® Brand
    • Unbrako® Brand
      > Stainless Steel
    • Flush Seating
      > Alloy Steel
    • Blue Devil® Brand
    • Holo-Krome® Brand
      > Brass
    • Holo-Krome® Brand
    • Blue Devil® Brand
    • Levl-Seal
      > Brass
      > Steel
  > Phillips Drive
  > Slotted Drive
Rings
  > E-Retaining Rings
    • Stainless Steel
    • Steel
  > External Retaining Rings
    • Stainless Steel
    • Steel
  > Internal Retaining Rings
    • Stainless Steel
    • Steel
Rivets
  > 3-Star™ Bulbing Type Blind Rivets
  > Blind Rivets
    • Aluminum Body / Aluminum Pin
      > Closed End
      > Countersunk External
      > Dome Head
    • Regular Pattern
    • White Eyelet
      > Large Flange
    • Aluminum Body / Steel Pin
      > Closed End
      > Closed End / Countersunk
      > Countersunk External
      > Dome Head
    • Regular Pattern
    • White Eyelet
      > Large Flange
    • Copper Body / Steel Pin
    • Stainless Steel Body / Stainless Steel Pin
      > Closed End
      > Dome Head
      > Large Flange
    • Stainless Steel Body / Steel Pin
      > Countersunk External
      > Dome Head
      > Large Flange
    • Steel Body / Steel Pin
      > Closed End
      > Countersunk External
      > Dome Head
    • Regular Pattern
    • White Eyelet
      > Large Flange
  > Drive Pin Rivets
    • Aluminum Body / Aluminum Pin
      > Brazier Head
      > Countersunk Head
      > Liner Head
      > Tamper Resistant Brazier Head
      > Tamper Resistant Liner Head
      > Universal Head
    • Aluminum Body / Stainless Steel Pin
      > Brazier Head
      > Countersunk Head
      > Universal Head
    • Nylon Body / Nylon Pin
      > Flat Head
      > Mushroom Head
      > Round Head
      > Truss Head
    • Grey Nylon
    • Beige Nylon
    • White Nylon
    • Nylon Body / Steel Pin
      > Mushroom Head
      > Round Head
    • Steel Body / Steel Pin
  > Masonry Drive Pin Rivets
  > Multigrip Rivets
    • Aluminum Body / Steel Pin
      > Brazier Head
      > Countersunk External
    • Pin=Black Phosphate Coated
    • Pin=Zinc Plated
      > Dome Head
    • Pin=Black Phosphate Coated
    • Pin=Zinc Plated
      > Large Flange
    • Pin=Black Phosphate Coated
    • Pin=Zinc Plated
      > Low Profile
    • Pin=Black Phosphate Coated
    • Pin=Zinc Plated
    • Steel Body / Steel Pin
      > Countersunk External
      > Dome Head
      > Large Flange
      > Low Profile
  > Orlock® High Strength Blind Rivets
    • Aluminum Body / Aluminum Pin
      > Countersunk External
      > Dome Head
    • Stainless Steel Body / Stainless Steel Pin
    • Steel Body / Steel Pin
      > Countersunk External
      > Dome Head
  > Structural Rivets
    • Aluminum
    • Steel, Zinc Plated
Rods and Studs
  > B7 Studs
  > Clinch Studs
    • Broaching Type Clinch Stud
    • Flush Head Self-Clinching Studs
      > Stainless Steel
      > Steel, Black Oxide
      > Steel, Zinc Plated
  > Threaded Rods
    • Steel, Plain
    • Steel, Zinc Plated
Screws
  > Button Head Socket Cap Screws
    • AISI 304 Stainless Steel (18-8)
    • Alloy Steel
      > Coarse Thread
      > Fine Thread
      > Holo-Krome® Brand
      > Imported
      > Unbrako® Brand
  > Cap Screws
    • Flat Slot Drive
    • Hex Head
      > AISI 304 Stainless Steel (18-8)
      > AISI 316 Stainless Steel
      > Grade 2 Steel, Black Oxide
      > Grade 2 Steel, Plain
      > Grade 2 Steel, Zinc
      > Grade 5 Steel, Plain
    • Made in U.S.A.
    • Imported
      > Grade 5 Steel, Yellow Zinc
      > Grade 5 Steel, Zinc
    • UNC Coarse Thread
    • Made in U.S.A.
    • Imported
    • UNF Fine Thread
    • Made in U.S.A.
      > Grade 8 Steel, Plain
    • UNC Coarse Thread
    • Imported
    • Made in U.S.A.
    • UNF Fine Thread
      > Grade 8 Steel, Yellow Zinc
    • UNC Coarse Thread
    • Made in U.S.A.
    • Imported
    • UNF Fine Thread
    • Made in U.S.A.
    • Imported
      > Grade 8 Steel, Zinc
      > Military Grade Fasteners
    • Grade 5 Steel, Yellow Cadmium Plating
    • 300 Series Stainless Steel
    • Coarse Thread
    • Fine Thread
    • Grade BD Alloy Steel, Yellow Zinc and Baked
    • Coarse Thread
    • Fine Thread
  > Captive Panel Screws
    • Style 1
    • Style 2
    • Style 4
    • Style 6
  > Concrete Screws
    • Flat Phillips Drive
    • Hex Slotted Washer
  > Deck Screws
    • Bugle Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Dacrotized Finish
    • Bugle Square Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Dacrotized Finish
  > Dowel Screws
  > Drywall Screws
    • Bugle Phillips Drive
      > Coarse Thread
    • Steel, Black Phosphate
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
      > Fine Thread
      > Self-Drilling Point
    • Steel, Black Phosphate
    • AISI 410 Stainless Steel
      > Sharp Point
    • Bugle Square Drive
      > Coarse Thread
      > Fine Thread
    • Flat Trim Head Phillips Drive
    • Pan Framing Phillips Drive
      > Steel, Black Phosphate
      > Steel, Zinc Plated
  > Eye Screws
  > Flange Screws
    • AISI 304 Stainless Steel (18-8)
    • Grade 5 Steel, Zinc
    • Steel, Black Oxide
    • Steel, Green Zinc
    • Steel, Zinc Plated
  > Flanged Button Head Socket Cap Screws
  > Flat Socket Cap Screws
    • Blue Devil® Brand
      > Coarse Thread
      > Fine Thread
    • Holo-Krome® Brand
    • Imported
      > AISI 304 Stainless Steel (18-8)
      > Alloy Steel
    • Unbrako® Brand
      > Alloy Steel, Plain
  > Hi-Lo Self-Tapping Sheet Metal Screws
    • Flat Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Flat Undercut Phillips Drive
      > AISI 410 Stainless Steel
      > Steel, Zinc Plated
    • Hex Indented Washer Phillips Drive
    • Hex Indented Washer, No Slot
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Hex Indented Washer, Slotted
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Pan 6-Lobe Drive
    • Pan Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Small Pan Head Phillips Drive
    • Truss Phillips Drive
  > Lag Screw Bolts
    • Hex Head
      > AISI 304 Stainless Steel (18-8)
      > Steel, Hot Dip Galvanized
      > Steel, Plain
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Hex Indented Washer, No Slot
      > Head Height = 0.172 - 0.190
      > Head Height = 0.200 - 0.230
      > Head Height = 0.200 - 0.230, Red Painted Head
      > Head Height = 0.300 - 0.312
    • Indented Hex Flange
  > Laminating Screws
  > Machine Screws
    • Binding Undercut Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Binding Undercut Slot Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Green Zinc
      > Steel, Zinc Plated
    • Binding Undercut Slot/Phillips Drive
    • Button Head 5-Lobe "Plus" Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Button Head 6-Lobe Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Button Head Hex Socket Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Fillister Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Fillister Slot Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Flat 100 Degree Undercut Phillips Drive
      > AISI 304 Stainless Steel (18-8)
    • 100 Degree Countersink
    • Flat 6-Lobe Drive
      > AISI 304 Stainless Steel (18-8)
    • 100 Degree Countersink
    • Standard 82 Degree Countersink
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • 100 Degree Countersink
    • Standard 82 Degree Countersink
    • Flat Countersunk Head 5-Lobe "Plus" Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Countersunk Head 6-Lobe Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Countersunk Head Drilled Spanner Drive
    • Flat Countersunk Head Hex Socket Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Countersunk Undercut Head 5-Lobe "Plus" Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Countersunk Undercut Head 6-Lobe Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Countersunk Undercut Head Drilled Spanner Drive
    • Flat Countersunk Undercut Head Hex Socket Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Head Notched Spanner Drive
    • Flat Phillips Drive
      > 18-8 Stainless Steel, Black Oxide
    • 100 Degree Countersink
    • Standard 82 Degree Countersink
      > AISI 304 Stainless Steel (18-8)
    • 100 Degree Countersink
    • Standard 82 Degree Countersink
      > AISI 316 Stainless Steel
      > Military Grade Fasteners
    • 100 Degree Countersink
    • Stainless Steel 18-8, DFARS
    • Steel, Yellow Cadmium Plating
    • Standard 82 Degree Countersink
    • Stainless Steel 18-8, DFARS
    • Coarse Thread
    • Fine Thread
      > Steel, Black Oxide
    • 100 Degree Countersink
    • Standard 82 Degree Countersink
      > Steel, Black Zinc
    • 100 Degree Countersink
    • Standard 82 Degree Countersink
      > Steel, Yellow Zinc
    • 100 Degree Countersink
    • Standard 82 Degree Countersink
      > Steel, Zinc Plated
    • 100 Degree Countersink
    • Standard 82 Degree Countersink
    • Flat Phillips/Slot Combo Drive
    • Flat Pozidriv® Alternative
    • Flat Slot Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Flat Undercut 6-Lobe Drive
    • Flat Undercut Phillips Drive
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
    • Standard 82 Degree Countersink
      > AISI 316 Stainless Steel
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Standard 82 Degree Countersink
    • 100 Degree Countersink
    • Flat Undercut Slot Drive
      > AISI 304 Stainless Steel (18-8)
    • Standard 82 Degree Countersink
    • 100 Degree Countersink
      > Steel, Zinc Plated
    • Hex Indented Phillips/Slot Combo Drive
    • Hex Indented Slotted
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Green Zinc
    • Serrated
    • Standard Head
      > Steel, Zinc Plated
    • Hex Indented Unslotted
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Hex Indented Washer Phillips Drive
      > Steel, Green Zinc
      > Steel, Nickel Plated
      > Steel, Zinc Plated
    • Hex Indented Washer Phillips/Slot Combo Drive
      > Steel, Green Zinc
    • Standard Point
      > Steel, Zinc Plated
    • Hex Indented Washer, No Slot
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Green Zinc
      > Steel, Zinc Plated
    • Hex Indented Washer, Slotted
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Green Zinc
    • Standard Point
    • Header Point
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Serrated
    • Standard Head
    • Oval Countersunk Head One-Way Slotted Drive
    • Oval Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Oval Slot Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Standard Head
    • Head Painted Brown
    • Head Painted Ivory
    • Head Painted White
    • Oval Undercut Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Oval Undercut Slot Drive
    • Pan 6-Lobe Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Pan Head Drilled Spanner Drive
    • Pan Head Phillips/Slot Combo Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Pan Phillips Drive
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > AISI 316 Stainless Steel
      > AISI 410 Stainless Steel
      > Military Grade Fasteners
    • Steel, Yellow Cadmium Plating
    • Fine Thread
    • Coarse Thread
    • Stainless Steel 18-8, DFARS
    • Coarse Thread
    • Fine Thread
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Green Zinc
      > Steel, Nickel Plated
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Pan Pozidriv® Alternative
    • Pan Slot Drive
      > AISI 304 Stainless Steel (18-8)
      > Nylon
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Green Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Pan Square Drive
    • Round Head One-Way Slotted Drive
      > Stainless Steel
      > Steel, Zinc Plated
    • Round Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Round Phillips/Slot Combo Drive
    • Round Slot Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Plain
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Round Washer Head Phillips Drive
    • Round Washer Head Square Drive
      > AISI 304 Stainless Steel (18-8)
    • Truss Head 6-Lobe Drive
    • Truss Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Truss Phillips/Slot Combo Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Truss Slot Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Serrated
    • Standard Head
  > Particle Board Screws
  > Retractable Captive Panel Fasteners
    • Flare In Style
      > Black Finish
      > Natural Finish
    • Press In Style
      > Black Finish
      > Natural Finish
  > Self-Drilling Screws
    • Bugle Phillips Drive
    • Flat 6-Lobe Drive
    • Flat Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Full Thread
    • Part Thread
    • Flat Square Drive
      > AISI 410 Stainless Steel
      > Steel, Zinc Plated
    • Flat Trim Head Phillips Drive
    • Flat Trim Head Square Drive
    • Flat Undercut Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Machine Screw Threading
    • Standard Threading
    • Hex Indented Unslotted
    • Hex Indented Washer Phillips Drive
    • Hex Indented Washer Phillips/Slot Combo Drive
    • Hex Indented Washer, No Slot
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
    • Standard
    • with Bonded Sealing Washer
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Standard Point
    • Standard Threading
    • Machine Screw Threading
    • #4 Point
    • Standard Threading
    • Machine Screw Threading
    • #5 Point
    • Standard Threading
    • Machine Screw Threading
    • A/F=7/16"
    • with Bonded Sealing Washer
    • Serrated
    • Standard Point
    • #4 Point
    • A/F=1/4"
    • A/F=5/16"
    • A/F=7/16"
    • A/F=7/16" with Red Painted Head
    • A/F=7/16", Machine Screw Threading
    • Machine Screw Threading
    • #3 Point
    • Hex Indented Washer, Slotted
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Green Zinc
      > Steel, Zinc Plated
    • Serrated
    • Standard Threading
    • A/F=7/16", Machine Screw Threading
    • Machine Screw Threading
    • W/ Bonded Neoprene Washer
    • Regular Pattern
    • Modified Truss Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Phosphate
      > Steel, Zinc Plated
    • Oval Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Oval Undercut Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Pan 6-Lobe Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Pan Framing Phillips Drive
    • Pan Head Phillips/Slot Combo Drive
    • Pan Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Part Thread
    • Pan Square Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Zinc Plated
    • Round Washer Head Phillips Drive
    • Wafer Head 6-Lobe Drive
    • Wafer Head Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Green Ceramic Coating
    • Hi-Lo Threading
    • Standard Threading
      > Steel, Zinc Plated
    • Reamer Wings
    • Standard Threading
  > Self-Piercing Screws
    • A/F=1/4"
      > AISI 304 Stainless Steel (18-8)
      > Head Painted White
      > Steel, Zinc Plated
    • A/F=3/8"
    • A/F=5/16"
    • Hex Indented Washer Phillips/Slot Combo Drive
    • Modified Truss Phillips Drive
    • W/ Bonded Neoprene Washer
  > Self-Tapping Sheet Metal Screws
    • Button Head 5-Lobe "Plus" Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Button Head 6-Lobe Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Button Head Hex Socket Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Flat 6-Lobe Drive
      > Type "A"
      > Type "AB"
    • Steel, Zinc Plated
    • Steel, Black Oxide
      > Type "B"
    • Flat Countersunk Head 5-Lobe "Plus" Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Flat Countersunk Head 6-Lobe Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Flat Countersunk Head Drilled Spanner Drive
    • Flat Countersunk Head Hex Socket Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Flat Countersunk Undercut Head 5-Lobe "Plus" Pin Drive
    • Flat Phillips Drive
      > Type "A"
    • Steel, Black Zinc
    • Steel, Black Oxide
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • 18-8 Stainless Steel, Black Oxide
      > Type "AB"
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • Steel, Black Oxide
    • Steel, Yellow Zinc
    • AISI 410 Stainless Steel
    • AISI 304 Stainless Steel (18-8)
      > Type "B"
    • Steel, Zinc Plated
    • Standard 82 Degree Countersink
    • 100 Degree Countersink
    • Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
    • Flat Slot Drive
      > Type "A"
      > Type "AB"
    • Flat Square Drive
      > Type "A"
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Flat Undercut 6-Lobe Drive
      > Type "AB"
      > Type "B"
    • Flat Undercut Phillips Drive
      > Type "A"
    • Steel, Black Oxide
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "B"
    • Steel, Zinc Plated
    • Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
    • Flat Undercut Slot Drive
      > Type "A"
      > Type "AB"
    • Flat Undercut Square Drive
      > Type "A"
      > Type "AB"
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • Hex Indented Slotted
      > Type "A"
      > Type "AB"
      > Type "B"
    • Hex Indented Unslotted
      > Type "A"
      > Type "AB"
    • Hex Indented Washer Phillips Drive
      > Type "A"
      > Type "AB"
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
      > Type "B"
    • Hex Indented Washer Phillips/Slot Combo Drive
    • Hex Indented Washer Square Drive
    • Hex Indented Washer, No Slot
      > Hi-Lo Threading
      > Type "A"
    • Steel, Black Oxide
    • Steel, Zinc Plated
    • Serrated
    • A/F=7/16"
    • A/F=7/16" with Serrations
    • Standard Head
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Steel, Zinc Plated
    • A/F=7/16" with Serrations
    • Serrated
    • Standard Head
    • Steel, Black Zinc
    • Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
    • 18-8 Stainless Steel, Black Oxide
      > Type "B"
    • Steel, Zinc Plated
    • Serrated
    • Standard Head
    • Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
    • Hex Indented Washer, Slotted
      > Type "A"
    • Steel, Black Oxide
    • Steel, Zinc Plated
    • Serrated
    • Standard Head
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Steel, Black Zinc
    • Steel, Black Oxide
    • Serrated
    • Standard Head
    • Steel, Green Zinc
    • Steel, Zinc Plated
    • Serrated
    • Standard Head
    • AISI 304 Stainless Steel (18-8)
    • Standard Head
    • Serrated
      > Type "B"
    • Steel, Zinc Plated
    • Serrated
    • Standard Head
    • Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
    • Oval Countersunk Head One-Way Slotted Drive
    • Oval Phillips Drive
      > Type "A"
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • #6 Head
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Steel, Plain
    • Steel, Black Zinc
    • Steel, Black Oxide
    • Standard Head
    • #6 Head
    • Steel, Zinc Plated
    • Standard Head
    • #6 Head
    • #8 Head
    • AISI 304 Stainless Steel (18-8)
      > Type "B"
    • Oval Slot Drive
      > Type "A"
      > Type "AB"
    • Oval Trim Head Phillips Drive
      > Steel, Plain
      > Steel, Zinc Plated
    • Oval Undercut Phillips Drive
      > Type "A"
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • Pan 6-Lobe Drive
      > Type "A"
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Steel, Black Oxide
    • Steel, Zinc Plated
    • Steel, Black Zinc
    • AISI 304 Stainless Steel (18-8)
      > Type "B"
    • Pan Head Drilled Spanner Drive
    • Pan Head Phillips/Slot Combo Drive
      > Type "A"
      > Type "AB"
    • Pan Phillips Drive
      > Type "A"
    • Steel, Black Zinc
    • Steel, Black Oxide
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • 18-8 Stainless Steel, Black Oxide
      > Type "AB"
    • Steel, Black Zinc
    • Steel, Black Oxide
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
    • Serrated
    • Standard Head
    • 18-8 Stainless Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
      > Type "B"
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • Pan Pozidriv® Alternative
    • Pan Slot Drive
      > Type "A"
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "B"
    • Pan Square Drive
      > Type "A"
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Steel, Zinc Plated
    • Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
      > Type "B"
    • Round Head One-Way Slotted Drive
      > Stainless Steel
      > Steel, Zinc Plated
    • Round Phillips Drive
      > Type "A"
      > Type "AB"
      > Type "B"
    • Round Slot Drive
      > Type "A"
    • Round Washer 6-Lobe Drive
    • Round Washer Head Phillips Drive
      > Type "A"
    • Steel, Zinc Plated
    • Steel, Black Oxide
    • Steel, Chrome
      > Type "AB"
    • Truss Head 6-Lobe Drive
    • Truss Phillips Drive
      > Type "A"
    • Steel, Black Zinc
    • Steel, Black Oxide
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "AB"
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Chrome
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Type "B"
    • Steel, Zinc Plated
    • Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
    • Truss Slot Drive
      > Type "A"
      > Type "AB"
    • Truss Square Drive
      > Type "A"
      > Type "AB"
  > SEMS Machine Screws
    • External Tooth Sems
      > Hex Indented Unslotted
      > Hex Indented Washer Phillips Drive
      > Hex Slotted
      > Hex Slotted Washer
      > Hex Washer
      > Pan 6-Lobe Drive
      > Pan Head Phillips/Slot Combo Drive
      > Pan Phillips Drive
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
      > Pan Slot Drive
    • Internal Tooth Sems
      > Hex Indented Washer, No Slot
      > Hex Indented Washer, Slotted
      > Pan 6-Lobe Drive
      > Pan Phillips Drive
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Pan Slot Drive
    • Split Lock Washer Sems
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated and Baked
    • Square Cone® Sems
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated and Baked
  > Set Screws
    • Cone Point
      > UNC Coarse Thread
    • Blue Devil® Brand
    • Import
      > UNF Fine Thread
    • Blue Devil® Brand
    • Import
    • Cup Point
      > AISI 304 Stainless Steel (18-8)
    • UNF Fine Thread
    • UNC Coarse Thread
      > Blue Devil® Brand
    • UNF Fine Thread
    • UNC Coarse Thread
      > Holo-Krome® Brand
      > Import
    • UNF Fine Thread
    • UNC Coarse Thread
      > Unbrako® Brand
    • Flat Point
      > UNC Coarse Thread
    • Blue Devil® Brand
    • Import
      > UNF Fine Thread
    • Import
    • Half-Dog Point
      > UNC Coarse Thread
      > UNF Fine Thread
    • Knurled Cup Point
      > Holo-Krome® Brand
      > Unbrako® Brand
    • Oval Point
      > UNC Coarse Thread
    • Blue Devil® Brand
    • Import
      > UNF Fine Thread
    • Square Head
      > Steel, Plain
      > Steel, Zinc Plated
  > Shoulder Screws
    • Hex Socket Drive
      > Alloy Steel
    • Blue Devil® Brand
    • Imported
    • Unbrako® Brand
    • Holo-Krome® Brand
      > Stainless Steel
    • Slotted Drive
    • Truss Head One-Way Slotted Drive
      > Steel, Chrome
      > Steel, Zinc Plated
  > Socket Head Cap Screws
    • Alloy Steel
      > Low Head
    • Unbrako® Brand
    • Blue Devil® Brand
    • Coarse Thread
    • Fine Thread
    • Holo-Krome® Brand
      > Standard Head
    • Holo-Krome® Brand
    • Imported
    • Unbrako® Brand
    • Fine Thread
    • Coarse Thread
    • Zinc Plated
    • Military Grade Fasteners
    • Stainless Steel
      > Blue Devil® Brand
    • Fine Thread
    • Coarse Thread
      > Generic
      > Holo-Krome® Brand
  > Socket Jam Screws
  > Thread-Cutting Screws
    • Type "1"
      > Flat Phillips Drive
      > Flat Undercut Phillips Drive
      > Hex Indented Unslotted
      > Hex Indented Washer, No Slot
    • Steel, Black Oxide
    • Steel, Green Zinc
    • Steel, Zinc Plated
      > Hex Indented Washer, Slotted
    • Steel, Green Zinc
    • Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Steel, Yellow Zinc
      > Pan 6-Lobe Drive
      > Pan Phillips Drive
    • Steel, Zinc Plated
    • Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
      > Pan Slot Drive
      > Truss Phillips Drive
    • Type "23"
      > Flat Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
      > Flat Undercut Phillips Drive
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Hex Indented Slotted
    • AISI 304 Stainless Steel (18-8)
      > Hex Indented Unslotted
      > Hex Indented Washer, No Slot
    • Steel, Black Oxide
    • Steel, Green Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Hex Indented Washer, Slotted
    • Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Steel, Black Oxide
    • Steel, Green Zinc
      > Oval Phillips Drive
      > Pan 6-Lobe Drive
      > Pan Phillips Drive
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Pan Slot Drive
      > Round Phillips Drive
      > Truss Phillips Drive
    • Type "25"
      > Flat Phillips Drive
    • Steel, Black Oxide
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Flat Slot Drive
      > Flat Undercut Phillips Drive
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Hex Indented Unslotted
      > Hex Indented Washer, No Slot
    • Steel, Zinc Plated
      > Hex Indented Washer, Slotted
    • Steel, Zinc Plated
      > Pan 6-Lobe Drive
      > Pan Phillips Drive
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
      > Pan Slot Drive
      > Truss Phillips Drive
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • Type "F"
      > Flat 6-Lobe Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Phosphate and Oil
    • Steel, Zinc Plated
      > Flat Phillips Drive
    • Steel, Zinc Plated
    • Steel, Black Oxide
    • Steel, Plain
    • AISI 410 Stainless Steel
    • AISI 304 Stainless Steel (18-8)
      > Flat Slot Drive
      > Flat Undercut 6-Lobe Drive
    • Steel, Zinc Plated
      > Flat Undercut Phillips Drive
    • Steel, Black Oxide
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • 18-8 Stainless Steel, Black Oxide
    • AISI 410 Stainless Steel
      > Flat Undercut Square Drive
      > Hex Indented Slotted
      > Hex Indented Unslotted
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
      > Hex Indented Washer, No Slot
    • Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Steel, Black Oxide
    • Steel, Green Zinc
    • AISI 304 Stainless Steel (18-8)
      > Hex Indented Washer, Slotted
    • Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Steel, Black Oxide
    • Steel, Green Zinc
    • AISI 304 Stainless Steel (18-8)
      > Oval Phillips Drive
      > Pan 6-Lobe Drive
    • Steel, Zinc Plated
    • Steel, Black Phosphate and Oil
    • AISI 304 Stainless Steel (18-8)
      > Pan Phillips Drive
    • Steel, Black Zinc
    • Steel, Zinc Plated
    • Steel, Black Oxide
    • Steel, Yellow Zinc
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
      > Pan Slot Drive
      > Pan Square Drive
      > Truss Phillips Drive
    • Steel, Zinc Plated
    • AISI 304 Stainless Steel (18-8)
  > Thumb Screws
    • Knurled Head
      > Plain
    • Aluminum
    • Stainless Steel
      > Washer Face
    • Aluminum
    • Stainless Steel
    • Knurled Head with Shoulder
      > Brass
    • Regular
      > Type "A", with Shoulder
    • Steel, Zinc Plated
      > Type "B", No Shoulder
    • Steel, Zinc Plated
    • Spade Head
      > No Shoulder Type B
    • AISI 304 Stainless Steel (18-8)
    • Brass
      > With Shoulder Type A
    • AISI 304 Stainless Steel (18-8)
  > Trilobular Thread-Rolling Screws
    • Generic Alternatives to Plastite® Screws
      > Flat 6-Lobe Drive
      > Flat Phillips Drive
    • Steel, Zinc Plated and Waxed
    • Steel, Black Oxide and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
      > Flat Undercut 6-Lobe Drive
      > Flat Undercut Phillips Drive
    • Steel, Zinc Plated and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
      > Hex Indented Washer, No Slot
    • Steel, Zinc Plated and Waxed
    • Steel, Black Oxide and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
      > Hex Indented Washer, Slotted
      > Pan 6-Lobe Drive
    • Steel, Black Zinc
    • Steel, Black Oxide and Waxed
    • Steel, Zinc Plated and Waxed
    • 410 Stainless Steel, Passivated and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
      > Pan Phillips Drive
    • Steel, Black Oxide and Waxed
    • Steel, Black Zinc
    • Zinc Plated and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
    • 410 Stainless Steel, Passivated and Waxed
      > Truss Phillips Drive
    • Generic Alternatives to Taptite® Screws
      > Flat 6-Lobe Drive
      > Flat Phillips Drive
    • Steel, Black Oxide and Waxed
    • Steel, Zinc Plated and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
    • 410 Stainless Steel, Passivated and Waxed
      > Flat Undercut 6-Lobe Drive
      > Flat Undercut Phillips Drive
    • Steel, Black Oxide and Waxed
    • Steel, Zinc Plated and Waxed
    • 410 Stainless Steel, Passivated and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
      > Hex Indented Unslotted
      > Hex Indented Washer Phillips Drive
      > Hex Indented Washer, No Slot
    • Steel, Green Zinc
    • Steel, Black Oxide and Waxed
    • Steel, Zinc Plated and Waxed
    • Part Thread
    • Serrated
    • Standard Head
    • 410 Stainless Steel, Passivated and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
      > Hex Indented Washer, Slotted
    • Steel, Green Zinc
    • Steel, Black Oxide and Waxed
    • Steel, Zinc Plated and Waxed
    • Serrated
    • Standard Head
    • 18-8 Stainless Steel, Passivated and Waxed
    • 410 Stainless Steel, Passivated and Waxed
      > Pan 6-Lobe Drive
    • Steel, Zinc Plated and Waxed
    • Steel, Black Oxide and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
    • 410 Stainless Steel, Passivated and Waxed
      > Pan Phillips Drive
    • Steel, Black Oxide and Waxed
    • Steel, Zinc Plated and Waxed
    • Steel, Black Zinc
    • 410 Stainless Steel, Passivated and Waxed
    • 18-8 Stainless Steel, Passivated and Waxed
      > Pan Pozidriv® Alternative
      > Pan Slot Drive
      > Truss Head 6-Lobe Drive
      > Truss Phillips Drive
  > U-Drive Hammer Screws
    • AISI 304 Stainless Steel (18-8)
    • AISI 316 Stainless Steel
    • Steel, Black Oxide
    • Steel, Zinc Plated
  > Weld Screws
    • Projections Over Head
    • Projections Under Head
    • Spot Type
  > Wing Screws
    • Type "A", Cold Formed, Full Body
    • Type "D", Stamped
  > Wood Screws
    • Flat Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Full Body
    • Undersized Body
      > Type 17 Point
    • Steel, Zinc Plated and Baked
    • Steel, Black Oxide
    • Flat Slot Drive
      > Full Body
      > Undersized Body
    • Flat Square Drive
    • Oval Phillips Drive
      > Full Body
      > Undersized Body
    • Oval Slot Drive
    • Round Phillips Drive
      > Full Body
      > Undersized Body
    • Round Slot Drive
      > Full Body
      > Undersized Body
Spacers
  > Hex Spacers
    • 1/4" Across Flats
    • 3/16" Across Flats
    • 5/16" Across Flats
  > Round Spacers
    • 1/2" Diameter
      > Aluminum
      > Nylon
      > Stainless Steel
    • 1/4" Diameter
      > Aluminum
      > Brass, Nickel Plated
      > Nylon
      > Stainless Steel
    • 3/16" Diameter
      > Aluminum
      > Nylon
      > Stainless Steel
    • 3/8" Diameter
      > Aluminum
      > Nylon
      > Stainless Steel
    • 5/16" Diameter
      > Aluminum
      > Nylon
      > Stainless Steel
Standoffs
  > Clinch Studs
    • Self-Clinching Standoff
  > Hex Female Standoffs
    • 1/4" Across Flats
      > Aluminum
      > Brass
    • Plain
    • Nickel Plated
    • Zinc Plated
      > Brass, Nickel Plated
      > Nylon
      > Stainless Steel
    • 1/8" Across Flats
    • 3/16" Across Flats
      > Aluminum
      > Nylon
      > Stainless Steel
    • 3/8" Across Flats
      > Aluminum
      > Stainless Steel
    • 5/16" Across Flats
      > Aluminum
      > Nylon
      > Stainless Steel
  > Hex Male-Female Standoffs
    • 1/4" Across Flats
      > Aluminum
      > Brass
    • Zinc Plated
    • Plain
    • Nickel Plated
      > Brass, Nickel Plated
      > Nylon
      > Stainless Steel
      > Steel, Zinc Plated
    • 3/16" Across Flats
      > Aluminum
      > Stainless Steel
      > Steel, Zinc Plated
    • 3/8" Across Flats
      > Aluminum
      > Stainless Steel
    • 5/16" Across Flats
      > Aluminum
      > Stainless Steel
  > Jackscrews
    • Stainless Steel
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
  > Round Female Standoffs
    • 1/2" Diameter
      > Nylon
    • 1/4" Diameter
      > Aluminum
      > Brass, Nickel Plated
      > Nylon
      > Stainless Steel
    • 1/4" Diameter
      > Aluminum
      > Stainless Steel
    • 3/16" Diameter
      > Aluminum
      > Nylon
      > Stainless Steel
    • 3/16" Diameter
      > Aluminum
      > Stainless Steel
    • 3/8" Diameter
      > Nylon
    • 5/16" Diameter
      > Nylon
  > Round Male-Female Standoffs
    • 1/4" Diameter
      > Aluminum
      > Brass, Nickel Plated
      > Stainless Steel
    • 3/16" Diameter
      > Aluminum
      > Stainless Steel
Washers
  > Construction Washers
    • Hillside Washers
    • Malleable Washers
      > Round Malleable Washers
    • Plain
    • Hot Dip Galvanized
      > Square Beveled Malleable Washers
    • Hot Dip Galvanized
    • Plain
    • Ogee Washers
  > Countersunk Finishing Washers
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Nickel Plated
  > Flat Washers
    • Dock Washers
      > Steel, Hot Dip Galvanized
      > Steel, Plain
    • Fender Washers
      > AISI 304 Stainless Steel (18-8)
      > AISI 316 Stainless Steel
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Machine Screw Washers
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Military Grade Fasteners
      > Light Series
    • Steel, Yellow Cadmium Plating
    • Stainless Steel 18-8, DFARS
    • NAS 1149
    • AN960L
      > Machine Screw Washers
    • Steel, Yellow Cadmium Plating
    • Stainless Steel 18-8, DFARS
      > Regular Pattern
    • Steel, Yellow Cadmium Plating
    • Stainless Steel 18-8, DFARS
    • Steel, Cadmium Plated
    • SAE
      > AISI 304 Stainless Steel (18-8)
      > AISI 316 Stainless Steel
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Hot Dip Galvanized
      > Steel, Plain
      > Steel, Yellow Zinc
    • Regular Pattern
    • Thru Hardened, Extra Thick
    • Thru Hardened
      > Steel, Zinc Plated
    • Square Flat Washers
      > Steel, Hot Dip Galvanized
      > Steel, Plain
    • Standard
      > AISI 304 Stainless Steel (18-8)
      > AISI 316 Stainless Steel
      > Nylon
    • USS
      > AISI 304 Stainless Steel (18-8)
      > AISI 316 Stainless Steel
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Hot Dip Galvanized
      > Steel, Plain
    • Hardened
    • Unhardened
      > Steel, Yellow Zinc
    • Regular Pattern
    • Thru Hardened, Extra Thick
    • Thru Hardened
      > Steel, Zinc Plated
  > Lock Washers
    • Helical Spring Lock Washers
      > Heavy Split
    • Steel, Zinc Plated
    • Made in U.S.A.
    • Hardened
    • Steel, Plain
    • High Alloy Steel, Yellow Zinc
      > High Collar
      > Medium Split
    • AISI 304 Stainless Steel (18-8)
    • 18-8 Stainless Steel, Black Oxide
    • AISI 316 Stainless Steel
    • Steel, Plain
    • Steel, Hot Dip Galvanized
    • Steel, Black Oxide
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
    • High Alloy Steel, Yellow Zinc
    • Made in U.S.A.
    • Imported
    • Steel, Black Zinc
      > Military Grade Fasteners
    • Steel
    • Stainless Steel 316, DFARS
  > Mechanical Washers
    • Shoulder Washers
  > Ribbed, Serrated and Tooth Lock Washers
    • Tooth Lock Washers
      > Countersunk External
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
    • Steel, Yellow Zinc
      > External
    • Steel, Black Zinc
    • Steel, Black Oxide
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
    • 18-8 Stainless Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
      > External-Internal Combination
    • AISI 304 Stainless Steel (18-8)
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
    • Steel, Black Oxide
      > Internal
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Black Zinc
    • Steel, Black Oxide
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
  > Structural Washers
    • Flat Structural Washers
      > Round
      > Square, Beveled
    • Round Structural Washers
      > Steel, Hot Dip Galvanized
      > Steel, Plain
      > Steel, Yellow Zinc
Metric Standard Fasteners
DIN Metric Bolts
  > Carriage Bolts
    • Metric DIN 603 Carriage Bolts
      > DIN 603 Carriage Stainless Steel
      > DIN 603 Carriage Steel
  > Flange Bolts
    • A2 Stainless Steel
    • Class 10.9 Steel, Black Phosphate
    • Class 10.9 Steel, Plain
    • Class 8.8 Steel, Plain
    • Class 8.8 Steel, Zinc Plated
  > Hanger Bolts
  > Heavy Hex Bolts Structural
  > Lifting Eye Bolts
    • C15 Steel
    • Drop Forged
    • Stainless Steel
  > Metric Hex Head Cap Screws / Bolts
  > Precision Swing Eye Bolts
    • Stainless Steel
    • Steel
  > T-Head Bolts
  > U-Bolts
DIN Metric Nuts
  > Cap Nuts
    • Acorn Cap Dome Nuts DIN 1587
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Brass
      > Nylon
      > Steel
    • Cap Nuts DIN 917
      > Brass
      > Stainless Steel
      > Steel
  > Hex Coupling Nuts
    • High Type
    • Standard
    • Turnbuckle-Style Left and Right Hand Threading
  > Hex Nuts
    • Hex Finished Nuts
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Aluminum
      > Brass
      > Class 10 Steel, Plain
      > Class 10 Steel, Zinc Plated
      > Class 12 Steel, Plain
      > Class 6 Steel, Zinc Plated
      > Class 8 Steel, Plain
      > Class 8 Steel, Yellow Zinc Plated
      > Class 8 Steel, Zinc Plated
      > Left-hand Thread
    • A2 Stainless Steel
    • Class 6 Steel, Plain
    • Class 6 Steel, Zinc Plated
      > Nylon
    • Hex Flange Nuts
      > Class 10 Steel, Yellow Zinc Plated and Baked
      > Class 8 Steel, Yellow Zinc Plated
      > Metric
    • Class 10 Steel, Zinc Plated and Baked
    • Class 8 Steel, Zinc Plated
    • Class 10 Steel, Plain
    • Class 8 Steel, Plain
    • A2 Stainless Steel
    • Hex Heavy Nuts
      > Class 10 Steel, Hot Dip Galvanized
      > Grade 2H Steel, Black
    • DIN 6915
    • ASTM A194
    • Hex High Nuts
      > Collar
      > Standard
    • Hex Jam Nuts
      > Hex Jam Nuts
    • Class 4 Steel, Zinc Plated
    • Class 4 Steel, Plain
    • DIN 439B
    • DIN 936
    • Brass
    • Left-hand Thread
    • A2 Stainless Steel
    • A4 Stainless Steel
    • Slotted Nuts
      > Slotted Castle Nuts
      > Slotted Thin Castle Nuts
  > Knurled Nuts
    • High Type
      > Brass
      > Steel
    • Low Type
      > Brass
      > Steel
  > Lifting Ring Eye Nuts
    • Stainless Steel
    • Steel
  > Lock Nuts
    • All Metal Prevailing Torque Lock Nuts
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Class 10 Steel, Zinc Plated
      > Class 8 Steel, Zinc Plated
      > DIN 980V
      > IFI B18.16.3M
    • Hex Flange Nuts with Serrations
    • Hex K Lock Keps Nuts
    • Hex Nylon Insert Flange Stop Lock Nuts
    • Hex Nylon Insert Stop Lock Nuts
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Brass
      > Class 10 Steel, Zinc Plated
      > Class 8 Steel, Yellow Zinc Plated
      > Class 8 Steel, Zinc Plated
    • High Hex Nylon Insert Stop Lock Nuts
      > Class 10 Steel, Zinc Plated
      > Class 8 Steel, Zinc Plated
    • Self-Locking Counter Nuts
  > Round Nuts
    • Drilled Holes
    • Slotted Drive
  > Shaft Ring Nuts
    • Drilled Holes
    • Nylon Insert Locking Ring
    • Slotted Drive
  > Square Nuts
    • Regular Square Nuts
    • Square Thin Nuts
  > T-Nuts
  > T-Slot Nuts
  > Weld Nuts
    • 1 Projection
    • Hex Weld Nuts
      > Stainless Steel
      > Steel
    • Multi Ribbed Projections
    • Square Weld Nuts
    • Tab Type Weld Nuts
  > Wing Nuts
    • Brass
    • Stainless Steel
    • Steel
DIN Metric Pins
  > Externally Threaded Tapered Pin
  > Grooved Pins
  > Grooved Tapered Pins
  > Internally Threaded Tapered Pin
  > Pull Dowel Pins
  > Solid Dowel Pins
    • Holo-Krome® Brand
      > Metric
    • Metric
      > DIN 6325
      > DIN 7 Type A and ISO 2338
    • AISI 304 Stainless Steel (18-8)
    • A1 Stainless Steel
    • Steel
    • Unbrako® Brand
      > Metric
  > Standard Cotter Pins
    • Stainless Steel
    • Steel, Zinc Plated
  > Standard Tapered Pin
    • Stainless Steel
    • Steel
DIN Metric Pipe Plugs
  > Metric DIN 906, DIN 908 & DIN 910
    • Straight Thread
      > A4 Stainless Steel
    • DIN 910
    • DIN 908
      > Brass
    • DIN 910
    • DIN 908
      > Steel
    • DIN 908
    • DIN 910
    • Tapered Thread
      > A4 Stainless Steel
      > Brass
      > Steel
    • Unbrako® Brand
    • Generic
DIN Metric Screws
  > Button Head Socket Cap Screws
    • Metric ISO 7380-1
      > A2 Stainless Steel
      > Class 10.9 Steel, Plain
    • Blue Devil® Brand
    • Holo-Krome® Brand
    • Unbrako® Brand
  > Flange Screws
    • Hex Socket Drive
    • Hex Washer Head
      > Locking Ribs
      > Locking Serrations
  > Flat Socket Cap Screws
    • DIN 7991 / ISO 10462
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Steel
    • Holo-Krome® Brand
      > Metric
    • Unbrako® Brand
      > Alloy Steel, Plain
      > Alloy Steel, Zinc
    • Blue Devil® Brand
      > Alloy Steel, Plain
  > ISO 7380-2 Flanged Button Head Socket Cap Screws
    • ISO 7380-2 Flanged Button Head
      > ISO 7380-2 Stainless Steel
      > ISO 7380-2 Steel Zinc Plated
    • Unbrako® Brand
  > Lag Screw Bolts
    • Hex Head
  > Metric Hex Head Cap Screws / Bolts
    • Coarse Thread
      > A2 Stainless Steel
    • DIN 933 Full Thread
    • DIN 931 Part Thread
      > A4 Stainless Steel
    • DIN 933 Full Thread
    • DIN 931 Part Thread
      > Aluminum
    • Full Thread
      > Brass
    • Din 933 Full Thread
      > Class 10.9 Steel, Plain
    • DIN 931 Part Thread
    • DIN 933 Full Thread
      > Class 10.9 Steel, Zinc Plated
    • Full Thread
    • Part Thread
      > Class 8.8 Steel, Plain
    • Part Thread
    • Full Thread
      > Class 8.8 Steel, Yellow Zinc
    • Part Thread
    • Full Thread
      > Class 8.8 Steel, Zinc Plated
    • DIN 931 Part Thread
    • DIN 933 Full Thread
      > Nylon
    • Full Thread
    • Fine Thread
      > Class 10.9 Steel, Plain
    • Part Thread
    • Full Thread
      > Class 8.8 Steel, Plain
    • Full Thread
    • Part Thread
      > Class 8.8 Steel, Zinc Plated
    • Full Thread
  > Metric Hex Socket Head Cap Screws
    • DIN 6912 Low Head w/ Key Guide
      > DIN 6912 A2 Stainless Steel
      > DIN 6912 Class 8.8 Steel
    • DIN 7984 Low Head
      > DIN 7984 A2 Stainless Steel
      > DIN 7984 Class 10.9 Steel
      > DIN 7984 Class 8.8 Steel
    • DIN 912 / ISO 4762 Socket Cap Screws
      > DIN 912 A2 Stainless Steel
      > DIN 912 A4 Stainless Steel
      > DIN 912 Aluminum
      > DIN 912 Class 12.9 Steel
    • DIN 912 Class 12.9 Standard
    • DIN 912 Fine Thread
    • DIN 912 Full Thread
    • DIN 912 Coarse Thread
    • USA Made Blue Devil® Brand
    • USA Made Blue Devil® Brand Black Oxide
    • Unbrako® Brand
    • Standard Threading
    • Full Thread
      > DIN 912 Class 8.8 Steel
      > DIN 912 Class 8.8 Steel, Zinc Plated
      > DIN 912 Nylon
  > Metric Machine Screws
    • DIN 7985 JIS B1111 Pan Phillips Machine Screws
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Class 4.8 Steel, Black Oxide
      > DIN 7985 JIS B1111 Class 4.8 Steel, Zinc Plated
    • DIN 7985A and ISO 7045
    • JIS B1111
    • DIN 84 Cheese Head Slot Drive
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Aluminum
      > Brass
      > Class 4.8 Steel, Zinc Plated
      > Nylon
    • DIN 85 Pan Slot Machine Screws
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Brass
      > Class 4.8 Steel, Zinc Plated
      > Nylon
    • DIN 963 Flat Slot Machine Screws
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Aluminum
      > Brass
      > Class 4.8 Steel, Zinc Plated
      > Nylon
    • DIN 964 Oval Slot Machine Screws
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Brass
      > Class 4.8 Steel, Zinc Plated
      > Nylon
    • DIN 965 Flat Phillips Machine Screws
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • DIN 966 Oval Phillips Machine Screws
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Class 4.8 Steel, Zinc Plated
    • Metric Tamper-Resistant Security Drive
      > Button Head 6-Lobe Pin Drive
    • Stainless Steel
      > Button Head Hex Socket Pin Drive
    • Stainless Steel
      > Flat Countersunk Head 6-Lobe Pin Drive
    • Stainless Steel
      > Flat Countersunk Head Drilled Spanner Drive
      > Flat Countersunk Head Hex Socket Pin Drive
    • Stainless Steel
      > Oval Countersunk Head Hex Socket Pin Drive
      > Pan Head Drilled Spanner Drive
  > Metric Set Screws
    • DIN 913 Flat Point
      > DIN 913 A2 Stainless Steel
      > DIN 913 A4 Stainless Steel
      > DIN 913 Alloy Steel
    • DIN 913 Coarse Thread
    • DIN 913 Fine Thread
    • DIN 914 Cone Point
      > DIN 914 A2 Stainless Steel
      > DIN 914 Alloy Steel
    • DIN 915 Dog Point
      > DIN 915 A2 Stainless Steel
      > DIN 915 Alloy Steel
    • DIN 916 Cup Point
      > DIN 916 A2 Stainless Steel
      > DIN 916 A4 Stainless Steel
      > Din 916 Alloy Steel
    • USA Made Blue Devil® Brand
    • DIN 916 Fine Thread
    • DIN 916 Coarse Thread
    • Unbrako® Brand
    • DIN 916 Knurled Cup Point
      > Blue Devil® Brand
      > Unbrako® Brand
    • Slotted Drive - DIN 417, 427, 551, 553
      > DIN 427 Part Thread
      > Full Thread
    • DIN 417 Dog Point
    • DIN 551 Flat Point
    • DIN 551 Steel
    • DIN 551 Stainless Steel
    • DIN 553 Cone Point
    • DIN 553 Steel
    • DIN 553 Brass
    • DIN 553 A2 Stainless Steel
    • Square Head DIN 479
  > Self-Tapping Sheet Metal Screws
    • Flat Phillips Drive
      > Stainless Steel
      > Steel
    • Flat Slot Drive
      > Stainless Steel
      > Steel
    • Hex Indented Unslotted
      > Steel
    • Oval Phillips Drive
      > Stainless Steel
      > Steel
    • Oval Slot Drive
      > Stainless Steel
      > Steel
    • Pan Phillips Drive
      > Stainless Steel
      > Steel
    • Pan Slot Drive
      > Stainless Steel
      > Steel
  > SEMS Machine Screws
    • Metric
      > External Tooth Sems
    • Steel, Yellow Zinc and Baked
    • Steel, Zinc Plated and Baked
      > Internal Tooth Sems
    • Steel, Yellow Zinc and Baked
    • Pan Phillips Drive
    • Small Pan Head Phillips Drive
      > Split Lock Washer Sems
    • Steel, Yellow Zinc and Baked
    • Steel, Zinc Plated and Baked
    • ISO 7045
    • JIS B1188
      > Split Lock Washer/Flat Washer Sems
    • Steel, Yellow Zinc and Baked
    • Hex Phillips
    • Pan Phillips Drive
    • Small Pan Head Phillips Drive
    • Steel, Zinc Plated and Baked
  > Shoulder Screws
    • Generic
      > Hex Head
    • Short Thread
    • Long Thread
      > Hex Socket Drive
    • Steel
    • Stainless Steel
    • Holo-Krome® Brand
    • Unbrako® Brand
  > Thread-Cutting Screws
    • Flat Phillips Drive
    • Oval Phillips Drive
    • Pan Phillips Drive
  > Thumb Screws
    • Knurled Head
      > Brass
      > Steel
    • Knurled High Head
      > Brass
      > Steel
  > Trilobular Thread-Rolling Screws
    • Flat Countersunk Cross Recess Type Z
    • Hex Indented Washer Head
    • Pan 6-Lobe Drive
    • Pan Phillips Recess Type Z
  > Wing Screws
    • Brass
    • Stainless Steel
    • Steel
DIN Metric Washers
  > Construction Washers
    • Square Tapered Washers for I-Sections
    • Square Tapered Washers for U-Sections
  > Countersunk Finishing Washers
    • Steel
  > Flat Washers
    • Coarse Finish
    • Construction Flat Washers
    • Fender Washers
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Nylon
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Small Outside Diameter
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Brass
      > Steel
    • Square Flat Washers
    • Standard
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Aluminum
      > Brass
      > Nylon
      > Steel, Plain
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Unhardened
    • Hardened
    • Thick
      > Stainless Steel
      > Steel
  > Keyed and Tabbed Washers
    • Keyed Washers
      > External Tab
    • Steel
    • Stainless Steel
      > Internal Tab
    • Tab Washers
      > 1 Tab
    • A2 Stainless Steel
    • A4 Stainless Steel
    • Steel
      > 2 Tabs
    • Steel
    • Stainless Steel
  > Lock Washers
    • Curved Spring Lock Washers
      > Stainless Steel
      > Steel
    • Helical Spring Lock Washers
      > DIN 127 Medium Split
    • A4 Stainless Steel
    • Steel, Yellow Zinc
    • Silicon Bronze
    • A2 Stainless Steel
    • Steel, Black Zinc
    • Steel, Zinc Plated
      > High Collar
    • Spring Steel
    • Black
    • Zinc Plated
    • A2 Stainless Steel
    • A4 Stainless Steel
    • Wave Spring Lock Washers
      > Stainless Steel
      > Steel
  > Mechanical Washers
    • Conical Spherical Washer Seats
    • Conical Spherical Washers
    • Disc Spring Washers
      > DIN 2093
      > DIN 6796
    • Shaft Flat Washers
    • Shaft Lock Washers
    • Thrust Flat Washers
  > Ribbed, Serrated and Tooth Lock Washers
    • Rib Spring Lock Washers
      > Heavy Duty
    • Spring Steel
    • Black
    • Zinc Plated
      > Regular Duty
    • Stainless Steel
    • Spring Steel
    • Black
    • Zinc Plated
    • Serrated Lock Washers
      > Countersunk External
      > External
    • Stainless Steel
    • Steel
      > Internal
    • Stainless Steel
    • Steel
    • Tooth Lock Washers
      > External
    • Steel
    • Stainless Steel
      > Internal
    • Steel
    • Stainless Steel
  > Shims and Rings
    • Precision Shim Rings
    • Sealing Ring Washers
Metric Retaining & Snap Rings
  > E-Retaining Rings
    • Stainless Steel
    • Steel
  > External Retaining Rings
    • Stainless Steel
    • Steel
  > External Snap Rings
  > Internal Retaining Rings
    • Stainless Steel
    • Steel
  > Internal Snap Rings
Metric Rivets
  > DIN Metric Solid Rivets DIN 660 & DIN 661
    • Flat Countersunk Head
    • Round Head
Metric Rods and Studs
  > Clinch Studs
    • Flush Head Self-Clinching Studs
  > Double-Ended Stud with Plain Center
    • A2 Stainless Steel
    • A4 Stainless Steel
    • Class 5.8 Steel, Plain
    • Grade 8 Steel, Plain
  > Threaded Rods
    • A2 Stainless Steel
    • A4 Stainless Steel
    • Aluminum
    • Brass
    • Class 10.9 Steel, Plain
    • Class 4.6 Steel, Plain
    • Class 4.6 Steel, Zinc
    • Class 8.8 Steel, Plain
    • Grade B7 Steel, Plain
    • Left-hand Thread
    • Nylon
    • Trapezoidal Thread
Metric Standoffs
  > Hex Female Standoffs
    • Metric
      > 4.5mm Across Flats
    • Aluminum
    • Stainless Steel
      > 6mm Across Flats
    • Aluminum
    • Stainless Steel
  > Hex Male-Female Standoffs
    • Metric
      > 4.5mm Across Flats
    • Aluminum
    • Stainless Steel
      > 6mm Across Flats
    • Aluminum
    • Stainless Steel
Stainless Metric Fasteners In Bulk
  > DIN 1 Taper Pins Type B
    • DIN 1 Taper Pins "B" 303 Stainless Steel
    • DIN 1 Taper Pins "B" 316Ti Stainless Steel
  > DIN 1052 Flat Washer
    • DIN 1052 Flat Washer A2 Stainless Steel
    • DIN 1052 Flat Washer A4 Stainless Steel
  > DIN 11024 Cotter Pins
    • DIN 1102 Cotter Pins A4 Stainless Steel
  > DIN 125 Washer Type A
    • DIN 125 Washer "A" 316Ti Stainless Steel
    • DIN 125 Washer "A" A2 Stainless Steel
    • DIN 125 Washer "A" A4 Stainless Steel
  > DIN 127 Spring Lock Washer Type B
    • DIN 127 Spring Lock Washer "B" 301 Stainless Steel
    • DIN 127 Spring Lock Washer "B" 316Ti Stainless Steel
    • DIN 127 Spring Lock Washer "B" A4 Stainless Steel
  > DIN 128 Curved Spring Lock Washer
    • DIN 128 Curved Spring Lock Washer 301 (A1) Stainless Steel
    • DIN 128 Curved Spring Lock Washer A4 Stainless Steel
  > DIN 137 Curved Spring Washer
    • DIN 137 Curved Spring Washer "A" 301 Stainless Steel
    • DIN 137 Wave Spring Washer "B" 301 Stainless Steel
    • DIN 137 Wave Spring Washer "B" A4 Stainless Steel
  > DIN 1440 Flat Washer Medium
    • DIN 1440 Flat Washer Medium A2 Stainless Steel
    • DIN 1440 Flat Washer Medium A4 Stainless Steel
  > DIN 1441 Flat Washer Coarse
    • DIN 1441 Flat Washer Coarse A2 Stainless Steel
    • DIN 1441 Flat Washer Coarse A4 Stainless Steel
  > DIN 1471 Grooved Pins Taper Grooved
    • DIN 1471 Grooved Pins Taper Grooved 303 Stainless Steel
  > DIN 1472 Grooved Pins Half Taper Groove
    • DIN 1472 Grooved Pins Half Taper Groove 303 Stainless Steel
  > DIN 1473 Parallel Grooved Pins
    • DIN 1473 Parallel Grooved Pins 303 Stainless Steel
  > DIN 1474 Grooved Pins 1/2 Reverse Taper
    • DIN 1474 Grooved Pins 1/2 Reverse Taper 303 Stainless Steel
  > DIN 1476 Grooved Pins Round Head
    • DIN 1476 Grooved Pins Round Head A2 Stainless Steel
  > DIN 1587 Hex Dome Cap Nuts High Type
    • DIN 1587 Hex Dome Cap Nuts "High" 303 Stainless Steel
    • DIN 1587 Hex Dome Cap Nuts "High" A2 Stainless Steel
    • DIN 1587 Hex Dome Cap Nuts "High" A4 Stainless Steel
    • DIN 1587 High Hex Dome Cap Nut Fine Thread A2 Stainless Steel
  > DIN 2093 Disc Springs
    • DIN 2093 Disc Springs 301 Stainless Steel
  > DIN 3017 Hose Clamps Type A
    • DIN 3017 Hose Clamps "A" A2 Stainless Steel
    • DIN 3017 Hose Clamps "A" A4 Stainless Steel
  > DIN 315 Wing Nuts German Type
    • DIN 315 Wing Nuts German Type A2 Stainless Steel
    • DIN 315 Wing Nuts German Type A4 Stainless Steel
  > DIN 316 Wing Screws German Type
    • DIN 316 Wing Screws German Type A2 Stainless Steel
    • DIN 316 Wing Screws German Type A4 Stainless Steel
  > DIN 404 Capstan Screws
    • DIN 404 Capstan Screws 303 Stainless Steel
  > DIN 417 Slot Set Screw Long Dog Point
    • DIN 417 Slot Set Screw Long Dog Point A2 Stainless Steel
    • DIN 417 Slot Set Screw Long Dog Point A4 Stainless Steel
  > DIN 427 Slot Headless Screws
    • DIN 427 Slot Headless Screws 303 Stainless Steel
    • DIN 427 Slot Headless Screws A4 Stainless Steel
  > DIN 431 Pipe Nut Thread According To DIN ISO 228
    • DIN 431 Pipe Nut Thread According To DIN ISO 228 A2
    • DIN 431 Pipe Nut Thread According To DIN ISO 228 A4
  > DIN 432 Washer External Tab
    • DIN 432 Washer External Tab A2 Stainless Steel
    • DIN 432 Washer External Tab A4 Stainless Steel
  > DIN 433 Flat Washer
    • DIN 433 Flat Washer A2 Stainless Steel
    • DIN 433 Flat Washer A4 Stainless Steel
  > DIN 434 Square Taper Washer
    • DIN 434 Square Taper Washer A2 Stainless Steel
    • DIN 434 Square Taper Washer A4 Stainless Steel
  > DIN 435 Square Taper Washer
    • DIN 435 Square Taper Washer A2 Stainless Steel
    • DIN 435 Square Taper Washer A4 Stainless Steel
  > DIN 436 Square Flat Washer
    • DIN 436 Square Flat Washer A2 Stainless Steel
    • DIN 436 Square Flat Washer A4 Stainless Steel
  > DIN 438 Slot Set Screws Cup Point
    • DIN 438 Slot Set Screws Cup Point A2 Stainless Steel
    • DIN 438 Slot Set Screws Cup Point A4 Stainless Steel
  > DIN 439 Hex Thin Nut
    • DIN 439 Hex Thin Nuts A2 Stainless Steel
    • DIN 439 Hex Thin Nuts A4 Stainless Steel
  > DIN 440 Flat Washer
    • DIN 440 Flat Washer "V" A2 Stainless Steel
    • DIN 440 Flat Washer "V" A4 Stainless Steel
    • DIN 440 Flat Washer Type R A2 Stainless Steel
    • DIN 440 Flat Washer Type R A4 Stainless Steel
  > DIN 444 Eye Bolts Type B
    • DIN 444 Eye Bolts "B" A2 Stainless Steel
    • DIN 444 Eye Bolts "B" A4 Stainless Steel
  > DIN 463 Tabwasher 2 Tabs
    • DIN 463 Tabwasher 2 Tabs A2 Stainless Steel
    • DIN 463 Tabwasher 2 Tabs A4 Stainless Steel
  > DIN 464 Knurled Thumb Screws High Type
    • DIN 464 Knurled Thumb Screws "High" 303 Stainless Steel
  > DIN 465 Slot Knurled Thumb Screw High Type
    • DIN 465 Slot Knurled Thumb Screw "High" 303 Stainless Steel
  > DIN 466 Knurled Thumb Nuts High Type
    • DIN 466 Knurled Thumb Nuts "High" 303 Stainless Steel
  > DIN 467 Knurled Thumb Nuts Thin Type
    • DIN 467 Knurled Thumb Nuts "Thin" 303 Stainless Steel
  > DIN 471 Retaining Rings For Shafts
    • DIN 471 Retaining Rings For Shafts Stainless Steel
  > DIN 472 Retaining Rings For Bores
    • DIN 472 Retaining Rings For Bores 301 Stainless Steel
  > DIN 5401 Security Balls
    • DIN 5401 Security Balls 6-Lobe Tx40 A2 Stainless Steel
    • DIN 5401 Security Balls Hex Socket A2 Stainless Steel
  > DIN 546 Slot Round Nuts
    • DIN 546 Slot Round Nuts 303 Stainless Steel
    • DIN 546 Slot Round Nuts A4 Stainless Steel
  > DIN 551 Slot Set Screws Flat Point
    • DIN 551 Slot Set Screws Flat Point A2 Stainless Steel
    • DIN 551 Slot Set Screws Flat Point A4 Stainless Steel
  > DIN 553 Slot Set Screws Cone Point
    • DIN 553 Slot Set Screws Cone Point A2 Stainless Steel
    • DIN 553 Slot Set Screws Cone Point A4 Stainless Steel
  > DIN 557 Square Nuts
    • DIN 557 Square Nuts A2-70 Stainless Steel
    • DIN 557 Square Nuts A4-80 Stainless Steel
  > DIN 562 Square Thin Nuts
    • DIN 562 Square Thin Nuts A2 Stainless Steel
    • DIN 562 Square Thin Nuts A4 Stainless Steel
  > DIN 571 Hex Head Wood Screws (Lag)
    • DIN 571 Hex Head Wood Screws A2 Stainless Steel
    • DIN 571 Hex Head Wood Screws A4 Stainless Steel
  > DIN 580 Lifting Eye Bolt Drop Forged
    • DIN 580 Lifting Eye Bolt Drop Forged A2 Stainless Steel
    • DIN 580 Lifting Eye Bolt Drop Forged A4 Stainless Steel
  > DIN 582 Lifting Eye Nuts
  > DIN 603 Carriage Bolts
    • DIN 603 Carriage Bolts A2 Stainless Steel
    • DIN 603 Carriage Bolts A4 Stainless Steel
  > DIN 6330 Hex Nuts Type B
    • DIN 6330 Hex Nuts "B" A2 Stainless Steel
    • DIN 6330 Hex Nuts "B" A4 Stainless Steel
  > DIN 6331 Hex Collar Nuts
    • DIN 6331 Hex Collar Nuts A2 Stainless Steel
    • DIN 6331 Hex Collar Nuts A4 Stainless Steel
  > DIN 6334 Hex Nuts
    • DIN 6334 Hex Nuts 3 D 316Ti Stainless Steel
    • DIN 6334 Hex Nuts 3 D A2 Stainless Steel
    • DIN 6334 Hex Nuts 3 D A4 Stainless Steel
  > DIN 653 Knurled Thumb Screws Thin Type
    • DIN 653 Knurled Thumb Screws "Thin" 303 Stainless Steel
  > DIN 660 Round Head Rivets
    • DIN 660 Round Head Rivets A2 Stainless Steel
    • DIN 660 Round Head Rivets A4 Stainless Steel
  > DIN 661 Countersunk Head Rivets
    • DIN 661 Countersunk Head Rivets A2 Stainless Steel
    • DIN 661 Countersunk Head Rivets A4 Stainless Steel
  > DIN 6796 Conical Spring Washers
    • DIN 6796 Conical Spring Washers A2 Stainless Steel
    • DIN 6796 Conical Spring Washers A4 Stainless Steel
  > DIN 6797 Toothed Lock Washer
    • DIN 6797 External Tooth Lock Washer "A" A2 Stainless Steel
    • DIN 6797 Internal Tooth Lock Washer "J" A2 Stainless Steel
  > DIN 6798 Serrated Lock Washer
    • DIN 6798 Serrated Lock Washer "A" A4A Stainless Steel
    • DIN 6798 Serrated Lock Washer "J" A2 Stainless Steel
    • DIN 6798 Serrated Lock Washer "J" A4 Stainless Steel
    • DIN 6798 Serrated Lock Washer "V" A2 Stainless Steel
    • DIN 6798 Serrated Lock Washer 316Tia Stainless Steel
    • DIN 6798 Serrated Tooth Lock Washers "A" A2 Stainless Steel
  > DIN 6799 Retaining Washer For Shafts
    • DIN 6799 Retaining Washer For Shafts Stainless Steel
  > DIN 6885 Parallel Key High Type Type A 316Tia
    • DIN 6885 Parallel Key "High" "A" 316Tia Stainless Steel
  > DIN 6912 Low Socket Head Cap Screw W/ Hole
    • DIN 6912 Low Socket Head Cap Screw W/ Hole A2 Stainless Steel
    • DIN 6912 Low Socket Head Cap Screw W/ Hole A4 Stainless Steel
  > DIN 6921 Hex Head Flange Bolts
    • DIN 6921 Hex Flange Serrated Screw A2 Stainless Steel
    • DIN 6921 Hex Head Screws Flange A2 Stainless Steel
    • DIN 6921 Hex Head Screws Flange A4 Stainless Steel
  > DIN 6923 Hex Flange Nuts
    • DIN 6923 Hex Flange Nuts A2 Stainless Steel
    • DIN 6923 Hex Flange Nuts A4 Stainless Steel
    • DIN 6923 Hex Flange Nuts Serrated A2 Stainless Steel
    • DIN 6923 Hex Flange Nuts Serrated A4 Stainless Steel
  > DIN 6926 Hex Flange Lock Nut
    • DIN 6926 Hex Flange Lock Nut Serrated A2 Stainless Steel
    • DIN 6926 Hex Flange Lock Nut Serrated A4 Stainless Steel
    • DIN 6926 Self-Locking Hex Flange Nut A2 Stainless Steel
    • DIN 6926 Self-Locking Hex Flange Nut A4 Stainless Steel
  > DIN 7 Parallel Pins Type A
    • DIN 7 Parallel Pins "A" 303 Stainless Steel
    • DIN 7 Parallel Pins "A" A4 Stainless Steel
  > DIN 705 Adjusting Rings
    • DIN 705 Adjusting rings 2 A2 M 3X4 A2A stainless steel
    • DIN 705 Adjusting rings 2 A2 M 4X5 A2A stainless steel
    • DIN 705 Adjusting rings 2 A2 M 5X8 A2A stainless steel
    • DIN 705 Adjusting rings 2 screw DIN 914 A2 stainless steel
    • DIN 705 Adjusting rings A2 M 3X4 A2A stainless steel
    • DIN 705 Adjusting rings A2 M 4X5 A2A stainless steel
    • DIN 705 Adjusting rings A2 M 4X6 A2A stainless steel
    • DIN 705 Adjusting rings A2 M 5X8 A2A stainless steel
    • DIN 705 Adjusting rings A2 M 6X10 A2A stainless steel
    • DIN 705 Adjusting rings A2 M 6X8 A2A stainless steel
    • DIN 705 Adjusting rings A2 M 8X10 A2A stainless steel
    • DIN 705 Adjusting rings A2 M 8X12 A2A stainless steel
    • DIN 705 Adjusting rings A2 stainless steel
  > DIN 7349 Flat Washer
    • DIN 7349 Flat Washer A2 Stainless Steel
    • DIN 7349 Flat Washer A4 Stainless Steel
  > DIN 7500 Thread Rolling Screw
    • DIN 7500 ME Thread Rolling Flat Head Screw A2 Stainless Steel
    • DIN 7500 CE Thread Rolling Screw Pan Head A2 Stainless Steel
  > DIN 7504 Self Drilling Screw
    • DIN 7504 Flat "O" Self Drilling Screw A2 Stainless Steel
    • DIN 7504 Hex Flange Self Driller "K" A2 Stainless Steel
    • DIN 7504 Self Driller Hex Flange Head "K"A4 Stainless Steel
    • DIN 7504 Self Drilling Pan Head Screw "M" A2 Stainless Steel
    • DIN 7504 Self Drilling Pan Head Screw "M" A4 Stainless Steel
  > DIN 7967 Self Locking Counter Nuts PAL
    • DIN 7967 Self Locking Counter Nuts A2 Stainless Steel
    • DIN 7967 Self Locking Counter Nuts A4 Stainless Steel
  > DIN 7971 Pan Slot Tapping Screw
    • DIN 7971 Pan Slot Tapping Screw A2 Stainless Steel
  > DIN 7972 Flat Slot Tapping Screw
    • DIN 7972 Flat Slot Tapping Screw A2 Stainless Steel
    • DIN 7972 Flat Slot Tapping Screw A4 Stainless Steel
  > DIN 7973 Slot Oval Head Tapping Screw
    • DIN 7973 Slot Oval Head Tapping Screw A2 Stainless Steel
  > DIN 7976 Hex Head Tapping Screws
    • DIN 7976 Hex Head Tapping Screws A2 Stainless Steel
    • DIN 7976 Slot Hex Head Tapping Screw A2 Stainless Steel
  > DIN 7980 Spring Lock Washer
    • DIN 7980 Spring Lock Washer 301 Stainless Steel
    • DIN 7980 Spring Lock Washer A4 Stainless Steel
  > DIN 7981 Pan Head Tapping Screw
    • DIN 7981 Pan 6-Lobe Tapping Screw A2 Stainless Steel
    • DIN 7981 Pan 6-Lobe Tapping Screw A4 Stainless Steel
    • DIN 7981 Pan Phillips Tapping Screw A2 Stainless Steel
    • DIN 7981 Pan Phillips Tapping Screw A4 Stainless Steel
    • DIN 7981 Pan Square Drive Tapping Screw A2 Stainless Steel
  > DIN 7982 Flat Head Tapping Screw
    • DIN 7982 Flat Head Tapping Screw 6-Lobe A2 Stainless Steel
    • DIN 7982 Flat Head Tapping Screw 6-Lobe A4 Stainless Steel
    • DIN 7982 Flat Phillips Tapping Screw A2 Stainless Steel
    • DIN 7982 Flat Phillips Tapping Screw A4 Stainless Steel
    • DIN 7982 Flat Square Tapping Screw A2 Stainless Steel
  > DIN 7983 Oval Head Tapping Screw
    • DIN 7983 Oval Tapping Screw 6-Lobe A2 Stainless Steel
    • DIN 7983 Oval Tapping Screw 6-Lobe A4 Stainless Steel
    • DIN 7983 Phillips Oval Tapping Screw A2 Stainless Steel
    • DIN 7983 Phillips Oval Tapping Screw A4 Stainless Steel
  > DIN 7984 Low Hex Socket Cap Screw
    • DIN 7984 Low Hex Socket Cap Screw A2 Stainless Steel
    • DIN 7984 Low Hex Socket Cap Screw A4 Stainless Steel
  > DIN 7985 Raised Cheese Head Screw
    • DIN 7985 Phillips Raised Cheese Head Screw A2 Stainless Steel
    • DIN 7985 Phillips Raised Cheese Head Screw A4 Stainless Steel
    • DIN 7985 Raised Cheese Head Screw 6-Lobe A2 Stainless Steel
    • DIN 7985 Raised Cheese Head Screw 6-Lobe A4 Stainless Steel
  > DIN 7989 Flat Washer A
    • DIN 7989 Flat Washer A2A Stainless Steel
    • DIN 7989 Flat Washer A4A Stainless Steel
  > DIN 7991 Hex Socket Flat Head Screw
    • DIN 7991 Flat Head Screw 6-Lobe A2 Stainless Steel
    • DIN 7991 Flat Head Screw 6-Lobe A4 Stainless Steel
    • DIN 7991 Hex Socket Flat Head Screw A2 Stainless Steel
    • DIN 7991 Hex Socket Flat Head Screw A4 Stainless Steel
  > DIN 7995 Oval Phillips Wood Screw
    • DIN 7995 Oval Phillips Wood Screw A2 Stainless Steel
    • DIN 7995 Oval Phillips Wood Screw A2-Cu Stainless Steel
  > DIN 7996 Round Phillips Wood Screw
    • DIN 7996 Round Phillips Wood Screw A2 Stainless Steel
    • DIN 7996 Round Phillips Wood Screw A4 Stainless Steel
  > DIN 7997 Flat Phillips Wood Screw
    • DIN 7997 Flat Phillips Wood Screw A2 Stainless Steel
  > DIN 80701 Toggle Nuts
    • DIN 80701 Toggle Nuts A4 Stainless Steel
  > DIN 80704 Bow Nuts
    • DIN 80704 Bow Nuts A4 Stainless Steel
  > DIN 835 Studs Metal End
    • DIN 835 Studs Metal End ~ 2D A2 Stainless Steel
    • DIN 835 Studs Metal End ~ 2D A4 Stainless Steel
  > DIN 84 Slot Cheese Head Screws
    • DIN 84 Slot Cheese Head Screws A2 Stainless Steel
    • DIN 84 Slot Cheese Head Screws A4 Stainless Steel
  > DIN 85 Pan Slot Screws
    • DIN 85 Pan Slot Screws A2 Stainless Steel
    • DIN 85 Pan Slot Screws A4 Stainless Steel
    • DIN 85 Pan Slot Screws A5-70 Stainless Steel
  > DIN 9021 Flat Washer
    • DIN 9021 Flat Washer A2 Stainless Steel
    • DIN 9021 Flat Washer A4 Stainless Steel
    • DIN 9021 Washer 316Ti Stainless Steel
  > DIN 906 Hex Socket Pipe Plugs
    • DIN 906 Hex Socket Pipe Plugs A2 Stainless Steel
    • DIN 906 Hex Socket Pipe Plugs A4 Stainless Steel
  > DIN 908 Hex Socket Screw Plugs
    • DIN 908 Hex Socket Screw Plugs A2 Stainless Steel
    • DIN 908 Hex Socket Screw Plugs A4 Stainless Steel
  > DIN 910 Hex Head Screw Plugs
    • DIN 910 Hex Head Screw Plugs A2 Stainless Steel
    • DIN 910 Hex Head Screw Plugs A4 Stainless Steel
  > DIN 912 Hex Socket Head Cap Screw
    • DIN 912 Hex Socket Head Cap Screw A4-80 Stainless Steel
    • DIN 912 Hex Socket Head Cap Screw Serrated A2 Stainless Steel
    • DIN 912 Hex Socket Head Cap Screws 309 Stainless Steel
    • DIN 912 Hex Socket Head Cap Screws A2 Stainless Steel
    • DIN 912 Hex Socket Head Cap Screws A4 Stainless Steel
  > DIN 913 Hex Socket Set Screw Flat Point
    • DIN 913 Hex Socket Set Screw Flat Point A2 Stainless Steel
    • DIN 913 Hex Socket Set Screw Flat Point A4 Stainless Steel
  > DIN 914 Hex Socket Set Screw Cone Point
    • DIN 914 Hex Socket Set Screw Cone Point A2 Stainless Steel
    • DIN 914 Hex Socket Set Screw Cone Point A4 Stainless Steel
  > DIN 915 Hex Socket Set Screw Dog Point
    • DIN 915 Hex Socket Set Screw Dog Point A2 Stainless Steel
    • DIN 915 Hex Socket Set Screw Dog Point A4 Stainless Steel
  > DIN 916 Hex Socket Set Screw Cup Point
    • DIN 916 Hex Socket Set Screw Cup Point A2 Stainless Steel
    • DIN 916 Hex Socket Set Screw Cup Point A4 Stainless Steel
  > DIN 917 Hex Cap Nuts
    • DIN 917 Hex Cap Nut A2 Stainless Steel
    • DIN 917 Hex Cap Nuts A4 Stainless Steel
  > DIN 920 Slot Small Pan Head Screw
    • DIN 920 Slot Small Pan Head Screw A2 Stainless Steel
  > DIN 921 Pan Slot Screw Large Head
    • DIN 921 Pan Slot Screw Large Head 303 Stainless Steel
  > DIN 923 Slot Shoulder Screw
    • DIN 923 Slot Shoulder Screw 303 Stainless Steel
  > DIN 928 Square Weld Nuts
    • DIN 928 Square Weld Nuts A2 Stainless Steel
    • DIN 928 Square Weld Nuts A4 Stainless Steel
  > DIN 929 Hex Weld Nuts
    • DIN 929 Hex Weld Nuts A2 Stainless Steel
    • DIN 929 Hex Weld Nuts A4 Stainless Steel
  > DIN 93 Tab Washer 1 Tab
    • DIN 93 Tab Washer 1 Tab A2 Stainless Steel
    • DIN 93 Tab Washer 1 Tab A4 Stainless Steel
  > DIN 931 Hex Head Bolts
    • DIN 931 Hex Head Bolts A2 Stainless Steel
    • DIN 931 Hex Head Bolts A4 Stainless Steel
  > DIN 933 Hex Head Screws
    • DIN 933 Hex Head Screws A2 Stainless Steel
    • DIN 933 Hex Head Screws A4 Stainless Steel
  > DIN 934 Hex Nuts
    • DIN 934 Hex Nut A2 Stainless Steel
    • DIN 934 Hex Nut A4 Stainless Steel
  > DIN 935 Hex Slot Castle Nut
    • DIN 935 Hex Slot Castle Nut A2 Stainless Steel
    • DIN 935 Hex Slot Castle Nut A4 Stainless Steel
  > DIN 936 Hex Thin Nuts
    • DIN 936 Hex Thin Nut A2 Stainless Steel
    • DIN 936 Hex Thin Nuts A4 Stainless Steel
  > DIN 937 Hex Slot Thin Castle Nuts
    • DIN 937 Hex Slot Thin Castle Nuts A2 Stainless Steel
    • DIN 937 Hex Slot Thin Castle Nuts A4 Stainless Steel
  > DIN 938 Studs Metal End
    • DIN 938 Studs Metal End A2 Stainless Steel
    • DIN 938 Studs Metal End A4 Stainless Steel
  > DIN 939 Studs Metal End
    • DIN 939 Studs Metal End 1.25Xd A2 Stainless Steel
    • DIN 939 Studs Metal End 1.25Xd A4 Stainless Steel
  > DIN 94 Split Pins
    • DIN 94 Split Pins A2 Stainless Steel
    • DIN 94 Split Pins A4 Stainless Steel
  > DIN 95 Slot Oval Head Wood Screws
    • DIN 95 Slot Oval Head Wood Screws A2 Stainless Steel
    • DIN 95 Slot Oval Head Wood Screws A4 Stainless Steel
  > DIN 96 Slot Round Head Wood Screws
    • DIN 96 Slot Round Head Wood Screws A2 Stainless Steel
    • DIN 96 Slot Round Head Wood Screws A4 Stainless Steel
  > DIN 963 Flat Slot Screws
    • DIN 963 Flat Slot Screws A2 Stainless Steel
    • DIN 963 Flat Slot Screws A4 Stainless Steel
  > DIN 964 Slot Oval Head Screws
    • DIN 964 Slot Oval Head Screws A2 Stainless Steel
    • DIN 964 Slot Oval Head Screws A4 Stainless Steel
  > DIN 965 Flat Head Screws
    • DIN 965 Flat Head Screws 6-Lobe A2 Stainless Steel
    • DIN 965 Flat Head Screws 6-Lobe A4 Stainless Steel
    • DIN 965 Flat Phillips Screws A2 Stainless Steel
    • DIN 965 Flat Phillips Screws A4 Stainless Steel
  > DIN 966 Oval Head Screws
    • DIN 966 Oval Head Screws 6-Lobe A2 Stainless Steel
    • DIN 966 Oval Head Screws 6-Lobe A4 Stainless Steel
    • DIN 966 Oval Phillips Screws A2 Stainless Steel
    • DIN 966 Oval Phillips Screws A4 Stainless Steel
  > DIN 97 Flat Slot Wood Screws
    • DIN 97 Flat Slot Wood Screws A2 Stainless Steel
    • DIN 97 Flat Slot Wood Screws A4 Stainless Steel
  > DIN 976 Stud Bolts
    • DIN 976-1 Stud Bolt A2 Stainless Steel
    • DIN 976-1 Stud Bolt A4 Stainless Steel
  > DIN 979 Hex Slot Thin Castle Nuts
    • DIN 979 Hex Slot Thin Castle Nuts A2 Stainless Steel
    • DIN 979 Hex Slot Thin Castle Nuts A4 Stainless Steel
  > DIN 982 Self-Locking Hex Nuts High Type
    • DIN 982 Self-Locking Hex Nuts "High" A2 Stainless Steel
    • DIN 982 Self-Locking Hex Nuts "High" A4 Stainless Steel
  > DIN 985 Low Self-Locking Hex Nut
    • DIN 985 Low Self-Locking Hex Nut A2 Stainless Steel
    • DIN 985 Low Self-Locking Hex Nut A4 Stainless Steel
  > DIN 986 Hex Dome Cap Lock Nut
    • DIN 986 Hex Dome Cap Lock Nut A2 Stainless Steel
  > DIN 988 Shim Rings
    • DIN 988 Shim Rings A2 Stainless Steel
  > ISO 13918 Welding Studs Type Point
    • ISO 13918 Welding Studs Type PT A2 Stainless Steel
  > ISO 14579 Socket Cap Screw 6-Lobe
    • ISO 14579 Socket Cap Screw 6-Lobe A2 Stainless Steel
  > ISO 14580 Socket Cap Screw 6-Lobe Low Head
    • ISO 14580 Socket Cap Screw 6-Lobe Low Head A2 Stainless Steel
  > ISO 15983 Blind Rivets Flat Head
    • ISO 15983 Blind Rivets Flat Head A2 Stainless Steel
    • ISO 15983 Blind Rivets Flat Head A4 Stainless Steel
  > ISO 15984 Blind Rivets Flat Head
    • ISO 15984 Blind Rivets Flat Head A2 Stainless Steel
  > ISO 16585 Flat Head Blind Rivets
    • ISO 16585 Flat Head Blind Rivets A2 Stainless Steel
  > ISO 4014 Hex Head Bolts
    • ISO 4014 Hex Head Bolts A2 Stainless Steel
    • ISO 4014 Hex Head Bolts A4-80 Stainless Steel
  > ISO 4017 Hex Head Screws
    • ISO 4017 Hex Head Screws A2 Stainless Steel
    • ISO 4017 Hex Head Screws A4-80 Stainless Steel
  > ISO 4032 Hex Nuts
    • ISO 4032 Hex Nuts A2-70 Stainless Steel
    • ISO 4032 Hex Nuts A4-80 Stainless Steel
  > ISO 4035 Hex Thin Nuts
    • ISO 4035 Hex Thin Nuts A2 Stainless Steel
  > ISO 7380 Button Head Screw
    • ISO 7380-1 Button Head Screw 6-Lobe A2 Stainless Steel
    • ISO 7380-1 Button Head Socket Cap Screw A2 Stainless Steel
    • ISO 7380-1 Button Head Socket Cap Screw A4 Stainless Steel
    • ISO 7380-2 Button Head Screw 6-Lobe-Flange A2 Stainless Steel
    • ISO 7380-2 Button Head Socket Cap Screw Flange A2
    • ISO 7380-2 Button Head Socket Cap Screw Flange A4
  > ISO 8675 Hex Thin Nuts Fine Thread
    • ISO 8675 Hex Thin Nuts Fine Thread A2 Stainless Steel
  > ISO 8750 Spring-Type Straight Pins
    • ISO 8750 Spring-Type Straight Pins 301 Stainless Steel
  > ISO 8752 Slotted Spring Dowel Pin
    • ISO 8752 Slotted Spring Dowel Pin 301 Stainless Steel
Security Fasteners
Security Screws
  > Machine Screws
    • Button Head Hex Socket Pin Drive
      > Stainless Steel
    • Metric Standard Fasteners
    • Inch Standard Fasteners
    • Button Head Torx 6-Lobe Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Metric Standard Fasteners
    • Inch Standard Fasteners
    • Flat Countersunk Head Drilled Spanner Drive
      > Inch Standard Fasteners
      > Metric Standard Fasteners
    • Flat Countersunk Head Hex Socket Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Metric Standard Fasteners
    • Inch Standard Fasteners
    • Flat Countersunk Head Torx 6-Lobe Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Inch Standard Fasteners
    • Metric Standard Fasteners
    • Flat Countersunk Undercut Head Drilled Spanner Drive
    • Flat Countersunk Undercut Head Hex Socket Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Countersunk Undercut Head Torx 6-Lobe Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Head Notched Spanner Drive
    • Oval Countersunk Head Hex Socket Pin Drive
    • Oval Countersunk Head One-Way Slotted Drive
    • Pan Head Drilled Spanner Drive
      > Inch Standard Fasteners
      > Metric Standard Fasteners
    • Round Head One-Way Slotted Drive
      > Stainless Steel
      > Steel, Zinc Plated
    • Button Head 5-Lobe "Plus" Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Countersunk Head 5-Lobe "Plus" Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
    • Flat Countersunk Undercut Head 5-Lobe "Plus" Pin Drive
      > Alloy Steel, Plain
      > Stainless Steel
  > Self-Tapping Sheet Metal Screws
    • Button Head 5-Lobe "Plus" Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Button Head 6-Lobe Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Button Head Hex Socket Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Flat Countersunk Head 5-Lobe "Plus" Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Flat Countersunk Head 6-Lobe Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Flat Countersunk Head Drilled Spanner Drive
    • Flat Countersunk Head Hex Socket Pin Drive
      > Stainless Steel
      > Steel, Black Oxide
    • Flat Countersunk Undercut Head 5-Lobe "Plus" Pin Drive
    • Oval Countersunk Head One-Way Slotted Drive
    • Pan Head Drilled Spanner Drive
    • Round Head One-Way Slotted Drive
      > Stainless Steel
      > Steel, Zinc Plated
  > Shoulder Screws
    • Truss Head One-Way Slotted Drive
      > Steel, Chrome
      > Steel, Zinc Plated
Security Nuts
  > Barrel Nuts
  > Break Away Nuts
    • Aluminum
    • Zinc Die Cast
Security Tools
  > Insert Bit
    • 6-Lobe Pin Drive
    • Drilled Spanner Drive
    • Hex Socket Pin Drive
  > Insert Bit Adapter
  > Replacement Bits
    • Hex Socket Pin Drive
  > Short Arm Key
    • 6-Lobe Pin Drive
    • Hex Socket Pin Drive

Bolts
Battery Bolts
Bent Anchor Foundation Bolts
  > Steel, Hot Dip Galvanized
  > Steel, Plain
Carriage Bolts
  > Round Head, Square Neck
    • Metric DIN 603 Carriage Bolts
      > Stainless Steel
      > Steel
    • Zinc Plated Carriage Bolts
      > Full Thread
      > Part Thread
    • Carriage Bolts Hot Dip Galvanized
    • Stainless Steel Carriage Bolts
    • Carriage Bolts Plain Steel
      > Full Thread
      > Part Thread
    • Black Oxide Carriage Bolts
    • Carriage Bolts Grade 5 Steel, Zinc Plated
      > Full Thread
      > Part Thread
    • Carriage Bolts Grade 5 Steel, Plain
      > 6" Thread Length
      > Full Thread
    • Carriage Bolts Grade 8 Steel, Yellow Zinc
  > Flat Head, Square Neck
    • A307 Steel, Zinc
  > Round Head, Ribbed Neck
  > Round Head, Short Square Neck
Elevator Bolts
  > Steel, Plain
  > Steel, Zinc Plated
Eye Bolts
Flange Bolts
  > Flange Bolts Grade 8 Steel, Black Phosphate
  > Flange Bolts Stainless Steel
  > Metric Standard Fasteners
    • A2 Stainless Steel
    • Class 10.9 Steel, Black Phosphate
    • Class 10.9 Steel, Plain
    • Class 8.8 Steel, Plain
    • Class 8.8 Steel, Zinc Plated
Hanger Bolts
  > Full Thread
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
  > Metric Standard Fasteners
  > Plain Center
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
Heavy Hex Bolts
  > Grade B Steel, Hot Dip Galvanized
  > Grade B Steel, Plain
  > Grade B Steel, Zinc Plated
  > Grade B7 Steel, Plain
Heavy Hex Bolts Structural
  > Metric Standard Fasteners
  > Steel, Hot Dip Galvanized
  > Steel, Plain
Hex Head Cap Screws
Lifting Eye Bolts
  > C15 Steel
  > Drop Forged
  > Stainless Steel
Machine Bolts
  > Hex Head
    • A307 Steel, Hot Dip Galvanized
    • A307 Steel, Plain
      > 6" Thread Length
      > Full Thread
      > Part Thread
      > Undersized Body
    • A307 Steel, Zinc
      > Full Thread
      > Standard Threading
      > Undersized Body
    • Grade 5 Steel, Plain
    • Grade 5 Steel, Yellow Zinc
    • Grade 5 Steel, Zinc
    • Steel, Hot Dip Galvanized
  > Square Head
    • A307 Steel, Plain
      > Full Thread
      > Standard Threading
    • A307 Steel, Zinc
      > Full Body
      > Full Thread
Plow Bolts
  > Dome Head
    • Grade 5 Steel, Plain
    • Grade 5 Steel, Zinc
    • Grade 8 Steel, Plain
      > 1-1/2" Grip Length
      > 1-3/4" Thread Length
      > Full Thread
      > Part Thread
    • Grade 8 Steel, Yellow Zinc
    • Grade 8 Steel, Zinc
    • Grade 9 Steel, Plain
      > 4" Thread Length
      > Full Thread
      > Part Thread
      > with Raised Shoulder
  > Flat Head
    • #3 Head
      > Grade 5 Steel, Plain
    • Part Thread
    • Full Thread
      > Grade 5 Steel, Yellow Zinc
    • Part Thread
    • Full Thread
      > Grade 5 Steel, Zinc
    • Part Thread
    • Full Thread
      > Grade 8 Steel, Plain
    • Full Thread
    • Part Thread
      > Grade 8 Steel, Yellow Zinc
    • Full Thread
    • Part Thread
      > Grade 8 Steel, Zinc
    • Full Thread
    • Part Thread
    • #7 Head
Precision Swing Eye Bolts
  > Stainless Steel
  > Steel
Step Bolts
Structural Bolts
  > A325 Hot Dip Galvanized
  > A325 Plain
  > Grade B Heavy Hex Bolts
T-Head Bolts
Tap Bolts
  > Full Thread Hex Tap Bolts Grade 5 Steel, Zinc
  > Full Thread Hex Tap Bolts Grade 8 Steel, Yellow Zinc
  > Full Thread Hex Tap Bolts Stainless Steel
  > Full Thread Hex Tap Bolts Steel, Zinc Plated
Timber Bolts
Track Bolts
U-Bolts
Screws
Cap Screws, Hex & Flat Head
  > Flat Slot Drive
  > Hex Head
    • Grade 2 Steel, Plain
    • Grade 2 Steel, Zinc
    • Grade 5 Steel, Plain
      > Imported
      > Made in U.S.A.
    • Grade 5 Steel, Yellow Zinc
    • Grade 5 Steel, Zinc
      > UNC Coarse Thread
    • Imported
    • Made in U.S.A.
      > UNF Fine Thread
    • Made in U.S.A.
    • Grade 8 Steel, Plain
      > UNC Coarse Thread
    • Made in U.S.A.
    • Imported
      > UNF Fine Thread
    • Grade 8 Steel, Yellow Zinc
      > UNC Coarse Thread
    • Made in U.S.A.
    • Imported
      > UNF Fine Thread
    • Imported
    • Made in U.S.A.
    • Grade 8 Steel, Zinc
    • Hex Bolts Grade 2 Steel, Black Oxide
    • Metric Standard Fasteners
      > AISI 304 Stainless Steel (18-8)
    • Full Thread
    • Part Thread
      > Coarse Thread
    • Class 8.8 Steel, Plain
    • Part Thread
    • Full Thread
    • Class 10.9 Steel, Zinc Plated
    • Part Thread
    • Full Thread
    • A4 Stainless Steel
    • Part Thread
    • Full Thread
    • Class 8.8 Steel, Yellow Zinc
    • Part Thread
    • Full Thread
    • Aluminum
    • Full Thread
    • Brass
    • Full Thread
    • Nylon
    • Full Thread
    • Class 8.8 Steel, Zinc Plated
    • Full Thread
    • Part Thread
    • Class 10.9 Steel, Plain
    • Full Thread
    • Part Thread
      > Fine Thread
    • Class 8.8 Steel, Plain
    • Part Thread
    • Full Thread
    • Class 10.9 Steel, Plain
    • Part Thread
    • Full Thread
    • Class 8.8 Steel, Zinc Plated
    • Full Thread
    • Military Grade Fasteners
      > 300 Series Stainless Steel
    • Coarse Thread
    • Fine Thread
      > Grade 5 Steel, Yellow Cadmium Plating
      > Grade BD Alloy Steel, Yellow Zinc and Baked
    • Coarse Thread
    • Fine Thread
    • Stainless Steel Hex Bolts
    • Stainless Steel Hex Bolts (316 Stainless)
Captive Panel Screws
  > Style 1
  > Style 2
  > Style 4
  > Style 6
Concrete Screws - TapconŽ-Style
  > Flat Phillips Drive TapconŽ-Style Concrete Screws
  > Hex Slotted Washer TapconŽ -Style Concrete Screws
Deck Screws
  > Bugle Phillips Drive
    • Phillips Drive Deck Screws Dacrotized Finish
    • Phillips Drive Deck Screws Stainless Steel
  > Bugle Square Drive
    • Square Drive Deck Screws Stainless Steel
    • Square Drive Deck Screws, Dacrotized Finish
Dowel Screws
Drywall Screws
  > Bugle Phillips Drive
    • Coarse Thread
      > Steel, Black Phosphate
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Fine Thread
    • Hi-Lo Thread
    • Self-Drilling Point
      > AISI 410 Stainless Steel
      > Steel, Black Phosphate
  > Bugle Square Drive
    • Coarse Thread
    • Fine Thread
  > Flat Trim Head Phillips Drive
  > Pan Framing Phillips Drive
    • Steel, Black Phosphate
    • Steel, Zinc Plated
Eye Screws
Hi-Lo Self-Tapping Sheet Metal Screws
  > Flat Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Black Oxide
    • Steel, Zinc Plated
  > Flat Undercut Phillips Drive
    • AISI 410 Stainless Steel
    • Steel, Zinc Plated
  > Hex Indented Washer Phillips Drive
  > Hex Indented Washer, No Slot
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Black Oxide
    • Steel, Zinc Plated
  > Hex Indented Washer, Slotted
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
  > Pan 6-Lobe Drive
  > Pan Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
  > Small Pan Head Phillips Drive
  > Truss Phillips Drive
Lag Screw Bolts
  > Hex Head Lag Screws
    • Metric Standard Fasteners
    • Stainless Steel Lag Bolts
    • Steel, Hot Dip Galvanized
    • Steel, Plain
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
  > Hex Indented Washer, No Slot
    • Head Height = 0.172 - 0.190
    • Head Height = 0.200 - 0.230
    • Head Height = 0.200 - 0.230, Red Painted Head
    • Head Height = 0.300 - 0.312
  > Indented Hex Flange
Laminating Screws
Machine Screws
  > Binding Undercut Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
  > Binding Undercut Slot Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Green Zinc
    • Steel, Zinc Plated
  > Binding Undercut Slot/Phillips Drive
  > Cheese Head Slot Drive
    • A2 Stainless Steel
    • A4 Stainless Steel
    • Aluminum
    • Brass
    • Class 4.8 Steel, Zinc Plated
    • Nylon
  > Fillister Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Zinc Plated
  > Fillister Slot Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
  > Flat 100 Degree Undercut Phillips Drive
    • AISI 304 Stainless Steel (18-8)
      > 100 Degree Countersink
  > Flat 6-Lobe Drive
    • AISI 304 Stainless Steel (18-8)
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
    • Steel, Black Oxide
    • Steel, Zinc Plated
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
  > Flat Phillips Drive
    • 18-8 Stainless Steel, Black Oxide
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
    • AISI 304 Stainless Steel (18-8)
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
    • AISI 316 Stainless Steel
    • Metric Standard Fasteners
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Military Grade Fasteners
      > 100 Degree Countersink
    • Stainless Steel 18-8, DFARS
    • Steel, Yellow Cadmium Plating
      > Standard 82 Degree Countersink
    • Stainless Steel 18-8, DFARS
    • Coarse Thread
    • Fine Thread
    • Steel, Black Oxide
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
    • Steel, Black Zinc
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
    • Steel, Yellow Zinc
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
    • Steel, Zinc Plated
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
  > Flat Phillips/Slot Combo Drive
  > Flat Pozidriv® Alternative
  > Flat Slot Drive
    • AISI 304 Stainless Steel (18-8)
    • Metric Standard Fasteners
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Aluminum
      > Brass
      > Class 4.8 Steel, Zinc Plated
      > Nylon
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
  > Flat Undercut 6-Lobe Drive
  > Flat Undercut Phillips Drive
    • 18-8 Stainless Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
      > Standard 82 Degree Countersink
    • AISI 316 Stainless Steel
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
  > Flat Undercut Slot Drive
    • AISI 304 Stainless Steel (18-8)
      > 100 Degree Countersink
      > Standard 82 Degree Countersink
    • Steel, Zinc Plated
  > Hex Indented Phillips/Slot Combo Drive
  > Hex Indented Slotted
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Green Zinc
      > Serrated
      > Standard Head
    • Steel, Zinc Plated
  > Hex Indented Unslotted
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Zinc Plated
  > Hex Indented Washer Phillips Drive
    • Steel, Green Zinc
    • Steel, Nickel Plated
    • Steel, Zinc Plated
  > Hex Indented Washer Phillips/Slot Combo Drive
    • Steel, Green Zinc
      > Standard Point
    • Steel, Zinc Plated
  > Hex Indented Washer, No Slot
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Green Zinc
    • Steel, Zinc Plated
  > Hex Indented Washer, Slotted
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Green Zinc
      > Header Point
      > Standard Point
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
      > Serrated
      > Standard Head
  > Oval Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Metric Standard Fasteners
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Class 4.8 Steel, Zinc Plated
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
  > Oval Slot Drive
    • AISI 304 Stainless Steel (18-8)
    • Metric Standard Fasteners
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Brass
      > Class 4.8 Steel, Zinc Plated
      > Nylon
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
      > Head Painted Brown
      > Head Painted Ivory
      > Head Painted White
      > Standard Head
  > Oval Undercut Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
  > Oval Undercut Slot Drive
  > Pan 6-Lobe Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
  > Pan Head Phillips/Slot Combo Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Zinc Plated
  > Pan Phillips Drive
    • 18-8 Stainless Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
    • AISI 316 Stainless Steel
    • AISI 410 Stainless Steel
    • Metric Standard Fasteners
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Class 4.8 Steel, Black Oxide
      > Class 4.8 Steel, Zinc Plated
    • DIN 7985A and ISO 7045
    • JIS B1111
    • Military Grade Fasteners
      > Stainless Steel 18-8, DFARS
    • Coarse Thread
    • Fine Thread
      > Steel, Yellow Cadmium Plating
    • Coarse Thread
    • Fine Thread
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Green Zinc
    • Steel, Nickel Plated
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
  > Pan Pozidriv® Alternative
  > Pan Slot Drive
    • Inch Standard Fasteners
      > AISI 304 Stainless Steel (18-8)
      > Nylon
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Green Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Metric Standard Fasteners
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Brass
      > Class 4.8 Steel, Zinc Plated
      > Nylon
  > Pan Square Drive
  > Round Head One-Way Slotted Drive
    • Stainless Steel
    • Steel, Zinc Plated
  > Round Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
  > Round Phillips/Slot Combo Drive
  > Round Slot Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Plain
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
  > Round Washer Head Phillips Drive
  > Round Washer Head Square Drive
    • AISI 304 Stainless Steel (18-8)
  > Tamper-Resistant Security Drive
  > Truss Head 6-Lobe Drive
  > Truss Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
  > Truss Phillips/Slot Combo Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
  > Truss Slot Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
      > Serrated
      > Standard Head
Particle Board Screws
Plastite & Taptite Style Thread Rolling Screws
  > Generic Alternatives to Taptite® Screws
    • Flat 6-Lobe Drive
    • Flat Phillips Drive
      > 18-8 Stainless Steel, Passivated and Waxed
      > 410 Stainless Steel, Passivated and Waxed
      > Steel, Black Oxide and Waxed
      > Steel, Zinc Plated and Waxed
    • Flat Undercut 6-Lobe Drive
    • Flat Undercut Phillips Drive
      > 18-8 Stainless Steel, Passivated and Waxed
      > 410 Stainless Steel, Passivated and Waxed
      > Steel, Black Oxide and Waxed
      > Steel, Zinc Plated and Waxed
    • Hex Indented Unslotted
    • Hex Indented Washer Phillips Drive
    • Hex Indented Washer, No Slot
      > 18-8 Stainless Steel, Passivated and Waxed
      > 410 Stainless Steel, Passivated and Waxed
      > Steel, Black Oxide and Waxed
      > Steel, Green Zinc
      > Steel, Zinc Plated and Waxed
    • Serrated
    • Standard Head
    • Part Thread
    • Hex Indented Washer, Slotted
      > 18-8 Stainless Steel, Passivated and Waxed
      > 410 Stainless Steel, Passivated and Waxed
      > Steel, Black Oxide and Waxed
      > Steel, Green Zinc
      > Steel, Zinc Plated and Waxed
    • Standard Head
    • Serrated
    • Pan 6-Lobe Drive
      > 18-8 Stainless Steel, Passivated and Waxed
      > 410 Stainless Steel, Passivated and Waxed
      > Steel, Black Oxide and Waxed
      > Steel, Zinc Plated and Waxed
    • Pan Phillips Drive
      > 18-8 Stainless Steel, Passivated and Waxed
      > 410 Stainless Steel, Passivated and Waxed
      > Steel, Black Oxide and Waxed
      > Steel, Black Zinc
      > Steel, Zinc Plated and Waxed
    • Pan Pozidriv® Alternative
    • Pan Slot Drive
    • Truss Head 6-Lobe Drive
    • Truss Phillips Drive
  > Metric Standard Fasteners
    • Flat Countersunk Cross Recess Type Z
    • Hex Indented Washer Head
    • Pan 6-Lobe Drive
    • Pan Phillips Recess Type Z
  > Plastite® Style Screws - Thread Rolling Screws for Plastic
    • Flat 6-Lobe (Torx) Drive
    • Flat Head Phillips Drive
      > 18-8 Stainless Steel, Plastite Style 48-2
      > Steel, Black Oxide Plastite Style 48-2
      > Steel, Zinc Plated Plastite Style 48-2
    • Flat Undercut 6-Lobe Drive
    • Flat Undercut Phillips Drive
      > 18-8 Stainless Steel, Passivated and Waxed
      > Steel, Zinc Plated and Waxed
    • Hex Indented Washer, No Slot
      > 18-8 Stainless Steel, Passivated and Waxed
      > Steel, Black Oxide and Waxed
      > Steel, Zinc Plated and Waxed
    • Hex Indented Washer, Slotted
    • Pan 6-Lobe (Torx) Drive
      > Pan Head Torx - 18-8 Stainless
      > Pan Head Torx - 410 Stainless
      > Pan Torx - Steel Black Oxide
      > Pan Torx - Steel Black Zinc
      > Pan Torx - Steel Zinc Plated
    • Pan Phillips Drive
      > Pan Phillips - 18-8 Stainless Steel
      > Pan Phillips - 410 Stainless Steel
      > Pan Phillips - Steel Zinc Plated
      > Pan Phillips - Steel, Black Oxide
      > Pan Phillips - Steel, Black Zinc
    • Truss Phillips Drive
Retractable Captive Panel Fasteners
  > Flare In Style
    • Black Finish
    • Natural Finish
  > Press In Style
    • Black Finish
    • Natural Finish
Self-Drilling Screws
  > Bugle Phillips Drive
  > Flat 6-Lobe Drive
  > Flat Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Black Oxide
    • Steel, Zinc Plated
      > Full Thread
      > Part Thread
  > Flat Square Drive
    • AISI 410 Stainless Steel
    • Steel, Zinc Plated
  > Flat Trim Head Phillips Drive
  > Flat Trim Head Square Drive
  > Flat Undercut Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Black Zinc
    • Steel, Zinc Plated
      > Machine Screw Threading
      > Standard Threading
  > Hex Indented Unslotted
  > Hex Indented Washer Head No Slot Self Drilling Screws
    • Hex Washer Self-Drilling Screws 18-8 Stainless Steel
    • Hex Washer Self-Drilling Screws 410 Stainless Steel
      > Standard
      > with Bonded Sealing Washer
    • Hex Washer Self-Drilling Screws Steel Zinc Plated
      > #2 or #3 Standard Point
    • Hex Washer Head Self Drilling Screws w/ Machine Screw Thread
    • Hex Washer Head Self Drilling Screws
      > #4 Long Point
    • Standard Threading
    • Machine Screw Threading
      > #5 Long Point
    • Standard Threading
    • Machine Screw Threading
      > Across Flat = 7/16"
      > Serrations Under Head
    • Standard Point
    • #4 Point
    • A/F=1/4"
    • A/F=5/16"
    • A/F=7/16"
    • Machine Screw Threading
    • A/F=7/16" with Red Painted Head
    • A/F=7/16", Machine Screw Threading
      > with Bonded Sealing Washer
    • Hex Washer Self-Drilling Screws Steel, Black Oxide
    • Hex Washer Self-Drilling Screws Steel, Black Zinc
  > Hex Indented Washer Phillips Drive
  > Hex Indented Washer Phillips/Slot Combo Drive
  > Hex Indented Washer, Slotted
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Black Oxide
    • Steel, Green Zinc
    • Steel, Zinc Plated
      > Regular Pattern
      > Serrated
    • Standard Threading
    • A/F=7/16", Machine Screw Threading
    • Machine Screw Threading
      > W/ Bonded Neoprene Washer
  > Modified Truss Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Black Phosphate
    • Steel, Zinc Plated
  > Oval Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Black Oxide
    • Steel, Zinc Plated
  > Oval Undercut Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
  > Pan 6-Lobe Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated
  > Pan Framing Phillips Drive
  > Pan Head Phillips Drive Self Drilling Screws
    • Pan Head Phillips Drive Self Drilling Screws Steel, Black Oxide
    • Pan Head Phillips Drive Self Drilling Screws Steel, Black Zinc
    • Pan Phillips Self Drilling Screws, 18-8 Stainless Steel
    • Pan Phillips Self Drilling Screws, 410 Stainless Steel
    • Pan Phillips Self Drilling Screws, Steel Zinc Plated
      > Pan Head Phillips Self Drilling Screws - Standard Head
      > Part Thread
      > Serrated
  > Pan Head Phillips/Slot Combo Drive
  > Pan Square Drive
    • AISI 304 Stainless Steel (18-8)
    • AISI 410 Stainless Steel
    • Steel, Zinc Plated
  > Round Washer Head Phillips Drive
  > Wafer Head 6-Lobe Drive
  > Wafer Head Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Green Ceramic Coating
      > Hi-Lo Threading
      > Standard Threading
    • Steel, Zinc Plated
      > Reamer Wings
      > Standard Threading
Self-Piercing Screws
  > A/F=1/4"
    • AISI 304 Stainless Steel (18-8)
    • Head Painted White
    • Steel, Zinc Plated
  > A/F=3/8"
  > A/F=5/16"
  > Hex Indented Washer Phillips/Slot Combo Drive
  > Modified Truss Phillips Drive
  > W/ Bonded Neoprene Washer
Self-Tapping Sheet Metal Screws
  > Button Head 5-Lobe "Plus" Pin Drive
    • Stainless Steel
    • Steel, Black Oxide
  > Button Head 6-Lobe Pin Drive
    • Stainless Steel
    • Steel, Black Oxide
  > Button Head Hex Socket Pin Drive
    • Stainless Steel
    • Steel, Black Oxide
  > Flat 6-Lobe Drive
    • Type "A"
    • Type "AB"
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Type "B"
  > Flat Countersunk Head 5-Lobe "Plus" Pin Drive
    • Stainless Steel
    • Steel, Black Oxide
  > Flat Countersunk Head 6-Lobe Pin Drive
    • Stainless Steel
    • Steel, Black Oxide
  > Flat Countersunk Head Drilled Spanner Drive
  > Flat Countersunk Head Hex Socket Pin Drive
    • Stainless Steel
    • Steel, Black Oxide
  > Flat Countersunk Undercut Head 5-Lobe "Plus" Pin Drive
  > Flat Phillips Drive
    • Metric Standard Fasteners
      > Stainless Steel
      > Steel
    • Type "A"
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Type "B"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Standard 82 Degree Countersink
    • 100 Degree Countersink
  > Flat Slot Drive
    • Metric Standard Fasteners
      > Stainless Steel
      > Steel
    • Type "A"
    • Type "AB"
  > Flat Square Drive
    • Type "A"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Type "AB"
  > Flat Undercut 6-Lobe Drive
    • Type "AB"
    • Type "B"
  > Flat Undercut Phillips Drive
    • Type "A"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Type "B"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
  > Flat Undercut Slot Drive
    • Type "A"
    • Type "AB"
  > Flat Undercut Square Drive
    • Type "A"
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
  > Hex Indented Slotted
    • Type "A"
    • Type "AB"
    • Type "B"
  > Hex Indented Unslotted
    • Metric Standard Fasteners
      > Steel
    • Type "A"
    • Type "AB"
  > Hex Indented Washer Phillips Drive
    • Type "A"
    • Type "AB"
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Type "B"
  > Hex Indented Washer Phillips/Slot Combo Drive
  > Hex Indented Washer Square Drive
  > Hex Indented Washer, No Slot
    • Hi-Lo Threading
    • Type "A"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • A/F=7/16"
    • A/F=7/16" with Serrations
    • Standard Head
    • Serrated
    • Type "AB"
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • A/F=7/16" with Serrations
    • Serrated
    • Standard Head
    • Type "B"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Serrated
    • Standard Head
  > Hex Indented Washer, Slotted
    • Type "A"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Serrated
    • Standard Head
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
    • Standard Head
    • Serrated
      > Steel, Black Oxide
    • Standard Head
    • Serrated
      > Steel, Black Zinc
      > Steel, Green Zinc
      > Steel, Zinc Plated
    • Serrated
    • Standard Head
    • Type "B"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Serrated
    • Standard Head
  > Oval Countersunk Head One-Way Slotted Drive
  > Oval Phillips Drive
    • Metric Standard Fasteners
      > Stainless Steel
      > Steel
    • Type "A"
      > #6 Head
    • AISI 304 Stainless Steel (18-8)
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
    • #6 Head
    • Standard Head
      > Steel, Black Zinc
      > Steel, Plain
      > Steel, Zinc Plated
    • #6 Head
    • Standard Head
    • #8 Head
    • Type "B"
  > Oval Slot Drive
    • Metric Standard Fasteners
      > Stainless Steel
      > Steel
    • Type "A"
    • Type "AB"
  > Oval Trim Head Phillips Drive
    • Steel, Plain
    • Steel, Zinc Plated
  > Oval Undercut Phillips Drive
    • Type "A"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Zinc
      > Steel, Zinc Plated
  > Pan 6-Lobe Drive
    • Type "A"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Type "B"
  > Pan Head Drilled Spanner Drive
  > Pan Head Phillips/Slot Combo Drive
    • Type "A"
    • Type "AB"
  > Pan Phillips Drive
    • Metric Standard Fasteners
      > Stainless Steel
      > Steel
    • Type "A"
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Type "AB"
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Type "B"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
  > Pan Pozidriv® Alternative
  > Pan Slot Drive
    • Metric Standard Fasteners
      > Stainless Steel
      > Steel
    • Type "A"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Type "B"
  > Pan Square Drive
    • Type "A"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Type "B"
  > Round Head One-Way Slotted Drive
    • Stainless Steel
    • Steel, Zinc Plated
  > Round Phillips Drive
    • Type "A"
    • Type "AB"
    • Type "B"
  > Round Slot Drive
    • Type "A"
  > Round Washer 6-Lobe Drive
  > Round Washer Head Phillips Drive
    • Type "A"
      > Steel, Black Oxide
      > Steel, Chrome
      > Steel, Zinc Plated
    • Type "AB"
  > Truss Head 6-Lobe Drive
  > Truss Phillips Drive
    • Type "A"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Type "AB"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Chrome
      > Steel, Zinc Plated
    • Type "B"
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
  > Truss Slot Drive
    • Type "A"
    • Type "AB"
  > Truss Square Drive
    • Type "A"
    • Type "AB"
SEMS Machine Screws
  > External Tooth Sems
    • Hex Indented Unslotted
    • Hex Indented Washer Phillips Drive
    • Hex Slotted
    • Hex Slotted Washer
    • Hex Washer
    • Pan 6-Lobe Drive
    • Pan Head Phillips/Slot Combo Drive
    • Pan Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Pan Slot Drive
  > Internal Tooth Sems
    • Hex Indented Washer, No Slot
    • Hex Indented Washer, Slotted
    • Pan 6-Lobe Drive
    • Pan Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Pan Slot Drive
  > Metric
    • External Tooth Sems
      > Steel, Yellow Zinc and Baked
      > Steel, Zinc Plated and Baked
    • Internal Tooth Sems
      > Steel, Yellow Zinc and Baked
    • Pan Phillips Drive
    • Small Pan Head Phillips Drive
    • Split Lock Washer Sems
      > Steel, Yellow Zinc and Baked
      > Steel, Zinc Plated and Baked
    • ISO 7045
    • JIS B1188
    • Split Lock Washer/Flat Washer Sems
      > Steel, Yellow Zinc and Baked
    • Small Pan Head Phillips Drive
    • Pan Phillips Drive
    • Hex Phillips
      > Steel, Zinc Plated and Baked
  > Split Lock Washer Sems
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated and Baked
  > Square Cone® Sems
    • AISI 304 Stainless Steel (18-8)
    • Steel, Zinc Plated and Baked
Serrated Flange Screws
  > AISI 304 Stainless Steel (18-8)
  > Grade 5 Steel, Zinc
  > Metric Standard Fasteners
    • Hex Socket Drive
    • Hex Washer Head
      > Locking Ribs
      > Locking Serrations
  > Steel, Black Oxide
  > Steel, Green Zinc
  > Steel, Zinc Plated
Socket Drive Screws
Tamper-Resistant Security Screws
Thread-Cutting Screws
  > Metric Standard Fasteners
    • Flat Phillips Drive
    • Oval Phillips Drive
    • Pan Phillips Drive
  > Type "1"
    • Flat Phillips Drive
    • Flat Undercut Phillips Drive
    • Hex Indented Unslotted
    • Hex Indented Washer, No Slot
      > Steel, Black Oxide
      > Steel, Green Zinc
      > Steel, Zinc Plated
    • Hex Indented Washer, Slotted
      > Steel, Green Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Pan 6-Lobe Drive
    • Pan Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Pan Slot Drive
    • Truss Phillips Drive
  > Type "23"
    • Flat Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Flat Undercut Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Hex Indented Slotted
      > AISI 304 Stainless Steel (18-8)
    • Hex Indented Unslotted
    • Hex Indented Washer, No Slot
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Green Zinc
      > Steel, Zinc Plated
    • Hex Indented Washer, Slotted
      > Steel, Black Oxide
      > Steel, Green Zinc
      > Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Oval Phillips Drive
    • Pan 6-Lobe Drive
    • Pan Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Pan Slot Drive
    • Round Phillips Drive
    • Truss Phillips Drive
  > Type "25"
    • Flat Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Flat Slot Drive
    • Flat Undercut Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
    • Hex Indented Unslotted
    • Hex Indented Washer, No Slot
      > Steel, Zinc Plated
    • Hex Indented Washer, Slotted
      > Steel, Zinc Plated
    • Pan 6-Lobe Drive
    • Pan Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Zinc Plated
    • Pan Slot Drive
    • Truss Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
  > Type "F"
    • Flat 6-Lobe Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Phosphate and Oil
      > Steel, Zinc Plated
    • Flat Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Plain
      > Steel, Zinc Plated
    • Flat Slot Drive
    • Flat Undercut 6-Lobe Drive
      > Steel, Zinc Plated
    • Flat Undercut Phillips Drive
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Zinc Plated
    • Flat Undercut Square Drive
    • Hex Indented Slotted
    • Hex Indented Unslotted
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Zinc Plated
    • Hex Indented Washer, No Slot
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Green Zinc
      > Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Hex Indented Washer, Slotted
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Green Zinc
      > Steel, Zinc Plated
    • Standard Head
    • Serrated
    • Oval Phillips Drive
    • Pan 6-Lobe Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Phosphate and Oil
      > Steel, Zinc Plated
    • Pan Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > AISI 410 Stainless Steel
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Pan Slot Drive
    • Pan Square Drive
    • Truss Phillips Drive
      > AISI 304 Stainless Steel (18-8)
      > Steel, Zinc Plated
Thumb Screws
  > Knurled Head
    • Plain
      > Aluminum
      > Stainless Steel
    • Washer Face
      > Aluminum
      > Stainless Steel
  > Knurled Head with Shoulder
    • Brass
  > Metric Standard Fasteners
    • Knurled Head
      > Brass
      > Steel
    • Knurled High Head
      > Brass
      > Steel
  > Regular
    • Type "A", with Shoulder
      > Steel, Zinc Plated
    • Type "B", No Shoulder
      > Steel, Zinc Plated
  > Spade Head
    • No Shoulder Type B
      > AISI 304 Stainless Steel (18-8)
      > Brass
    • With Shoulder Type A
      > AISI 304 Stainless Steel (18-8)
U-Drive Hammer Screws
  > AISI 304 Stainless Steel (18-8)
  > AISI 316 Stainless Steel
  > Steel, Black Oxide
  > Steel, Zinc Plated
Weld Screws
  > Projections Over Head
  > Projections Under Head
  > Spot Type
Wing Screws
  > Metric Standard Fasteners
    • Brass
    • Stainless Steel
    • Steel
  > Type "A", Cold Formed, Full Body
  > Type "D", Stamped
Wood Screws
  > Flat Phillips Drive
    • AISI 304 Stainless Steel (18-8)
    • Steel, Black Oxide
    • Steel, Zinc Plated
      > Full Body
      > Undersized Body
    • Type 17 Point
      > Steel, Black Oxide
      > Steel, Zinc Plated and Baked
  > Flat Slot Drive
    • Full Body
    • Undersized Body
  > Flat Square Drive
  > Oval Phillips Drive
    • Full Body
    • Undersized Body
  > Oval Slot Drive
  > Round Phillips Drive
    • Full Body
    • Undersized Body
  > Round Slot Drive
    • Full Body
    • Undersized Body
Nuts
Barrel Nuts
Break Away Nuts
  > Aluminum
  > Zinc Die Cast
Cage Nuts
  > AISI 304 Stainless Steel (18-8)
  > Steel, Zinc Plated
Cap Nuts
  > Acorn Cap Dome Nuts
    • Metric Standard Dome Nuts
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Brass
      > Nylon
      > Steel
    • Closed End
      > AISI 304 Stainless Steel (18-8)
      > Alloy Steel, Plain
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Nickel Plated
      > Washer Based
    • Open End
      > Steel, Nickel Plated
      > Washer Based, Zinc Die Cast
  > Metric DIN 917 Cap Nuts
    • Brass
    • Stainless Steel
    • Steel
Heavy Hex Structural Nuts
  > Type A194-2H
  > Type A563-DH
    • Medium Carbon Steel, Hot Dipped Galvanized
    • Medium Carbon Steel, Plain
      > Made in North America
Hex Coupling Nuts
  > Inch Standard Fasteners
  > Metric Standard Fasteners
    • High Type
    • Left and Right Hand Threading
    • Standard
Hex Nuts
  > Hex Finished Nuts
    • 18-8 Stainless Steel, Black Oxide
    • AISI 304 Stainless Steel (18-8)
    • AISI 316 Stainless Steel
    • Grade 5 Steel, Black Oxide
      > UNC Coarse Thread
    • Grade 5 Steel, Plain
      > Cold Formed
      > Hot Formed
    • Grade 5 Steel, Zinc
      > Cold Formed
      > Hot Formed
      > UNC Coarse Thread
    • Imported
    • Made in U.S.A.
      > UNF Fine Thread
    • Made in U.S.A.
    • Imported
    • Grade 8 Steel, Plain
      > Cold Formed
      > Hot Formed
    • Grade 8 Steel, Yellow Zinc
      > Cold Formed
      > Hot Formed
      > UNC Coarse Thread
    • Imported
    • Made in U.S.A.
      > UNF Fine Thread
    • Made in U.S.A.
    • Imported
    • Left Hand Thread
    • Metric Standard Fasteners
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Aluminum
      > Brass
      > Class 10 Steel, Plain
      > Class 10 Steel, Zinc Plated
      > Class 12 Steel, Plain
      > Class 6 Steel, Zinc Plated
      > Class 8 Steel, Plain
      > Class 8 Steel, Yellow Zinc Plated
      > Class 8 Steel, Zinc Plated
      > Left-hand Thread
    • A2 Stainless Steel
    • Class 6 Steel, Plain
    • Class 6 Steel, Zinc Plated
      > Nylon
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Hot Dip Galvanized
    • Steel, Plain
      > Cold Formed
      > Hot Formed
    • Steel, Yellow Zinc
    • Steel, Zinc Plated
      > Imported
    • Cold Formed
    • Hot Formed
      > Made in U.S.A.
  > Hex Flange Nuts
    • Class 10 Steel, Yellow Zinc Plated and Baked
    • Class 8 Steel, Yellow Zinc Plated
    • Metric
      > A2 Stainless Steel
      > Class 10 Steel, Plain
      > Class 10 Steel, Zinc Plated and Baked
      > Class 8 Steel, Plain
      > Class 8 Steel, Zinc Plated
    • Steel, Zinc Plated
  > Hex Heavy Nuts
    • AISI 304 Stainless Steel (18-8)
    • Grade 2H Steel, Hot Dip Galvanized
    • Grade 2H Steel, Plain
    • Grade 5 Steel, Zinc
    • Grade C Steel, Plain
    • Grade C Steel, Zinc
    • Grade DH Steel, Hot Dip Galvanized, Blue Wax
    • Grade DH Steel, Plain
    • Metric Standard Fasteners
      > Class 10 Steel, Hot Dip Galvanized
      > Grade 2H Steel, Black
    • ASTM A194
    • DIN 6915
    • Steel, Hot Dip Galvanized
      > Cold Formed
      > Hot Formed
    • Steel, Plain
      > Cold Formed
      > Hot Formed
    • Steel, Zinc Plated
      > Cold Formed
      > Hot Formed
  > Hex High Nuts
    • Collar
    • Standard
      > Inch Standard Fasteners
      > Metric Standard Fasteners
  > Hex Jam Nuts
    • Heavy Hex Jam Nuts
      > Grade 5 Steel, Zinc
      > Steel, Plain
    • Cold Formed
    • Hot Formed
      > Steel, Zinc Plated
    • Hot Formed
    • Cold Formed
    • Hex Jam Nuts
      > AISI 304 Stainless Steel (18-8)
      > Grade 5 Steel, Zinc
      > Grade 8 Steel, Yellow Zinc
      > Metric Standard Fasteners
    • Class 4 Steel, Zinc Plated
    • A2 Stainless Steel
    • A4 Stainless Steel
    • Brass
    • Left-hand Thread
    • Class 4 Steel, Plain
    • DIN 439B
    • DIN 936
      > Steel, Black Oxide and Oil
      > Steel, Black Zinc
      > Steel, Plain
    • Cold Formed
    • Hot Formed
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Hot Formed
    • Cold Formed
  > Hex Machine Screw Nuts
    • Military Grade Fasteners
    • Regular Pattern
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > AISI 316 Stainless Steel
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Nickel Plated
      > Steel, Plain
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Small Pattern
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide and Oil
      > Steel, Black Zinc
      > Steel, Green Zinc
      > Steel, Plain
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
  > Light Automotive
  > Slotted Nuts
    • Slotted Castle Nuts
      > Inch Standard Fasteners
      > Metric Standard Fasteners
    • Slotted Heavy Hex Nuts
      > Steel, Plain
    • Cold Formed
    • Hot Formed
    • Slotted Hex Nuts
      > Steel, Plain
    • Cold Formed
    • Hot Formed
      > Steel, Zinc Plated
    • Cold Formed
    • Hot Formed
    • Slotted Thin Castle Nuts
  > Type 6/6 Nylon
Internal Wrenching Allen Nuts
  > Stainless Steel
  > Steel
Knurled Nuts
  > High Type
    • Brass
    • Steel
  > Low Type
    • Brass
    • Steel
Lifting Ring Eye Nuts
  > Stainless Steel
  > Steel
Lock Nuts
  > 2-Way Reversible Lock Nuts
    • Steel, Black Oxide
    • Steel, Black Zinc
    • Steel, Zinc Plated
  > All Metal Prevailing Torque Lock Nuts
    • Grade-C Automation Style
      > Steel, Zinc Plated and Waxed
      > Stover® Alternative
    • Grade-G Flange Style
      > Stover® Alternative
    • Metric Standard Fasteners
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Class 10 Steel, Zinc Plated
      > Class 8 Steel, Zinc Plated
      > DIN 980V
      > IFI B18.16.3M
  > Conduit Lock Nuts
  > Flex Type Lock Nuts
    • Light Hex, Full Height
      > AISI 304 Stainless Steel (18-8)
      > Steel, Cadmium Plated and Waxed
    • Light Hex, Thin Height
      > AISI 304 Stainless Steel (18-8)
      > Steel, Cadmium Plated and Waxed
  > Hex Flange Nuts with Serrations
    • AISI 304 Stainless Steel (18-8)
    • Grade 5 Steel, Zinc
    • Grade 8 Steel, Yellow Zinc
    • Metric Standard Fasteners
    • Steel, Black Oxide
    • Steel, Black Zinc and Baked
    • Steel, Plain
    • Steel, Yellow Zinc and Baked
    • Steel, Zinc Plated
      > Unhardened
    • Steel, Zinc Plated and Baked
  > Hex K Lock Keps Nuts
    • Free-spinning Conical Washer
    • Metric Standard Fasteners
    • Regular Pattern
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Small Pattern
      > AISI 304 Stainless Steel (18-8)
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
  > Hex Large Flange Nuts with Serrations
  > Hex Nylon Insert Flange Stop Lock Nuts
    • Grade 8 Steel, Yellow Zinc
    • Metric Standard Fasteners
    • Steel, Zinc Plated
  > Hex Nylon Insert Stop Lock Nuts
    • Heavy Pattern
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Heavy Thin Pattern
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Metric Standard Fasteners
      > A2 Stainless Steel
      > A4 Stainless Steel
      > Brass
      > Class 10 Steel, Zinc Plated
      > Class 8 Steel, Yellow Zinc Plated
      > Class 8 Steel, Zinc Plated
    • Regular Pattern
      > 18-8 Stainless Steel, Black Oxide
      > AISI 304 Stainless Steel (18-8)
      > AISI 316 Stainless Steel
      > Grade 8 Steel, Yellow Zinc
      > Steel, Black Oxide
      > Steel, Black Zinc
      > Steel, Yellow Zinc
      > Steel, Zinc Plated
    • Thin Pattern
      > AISI 304 Stainless Steel (18-8)
      > Steel, Yellow Zinc
    • UNF Fine Thread
    • UNC Coarse Thread
      > Steel, Zinc Plated
  > High Hex Nylon Insert Stop Lock Nuts
    • Class 10 Steel, Zinc Plated
    • Class 8 Steel, Zinc Plated
  > Self-Locking Counter Nuts
Panel Nuts
Round Nuts
  >