- Flange on the nut acts like a washer to increase the bearing surface and distribute the load.
- Also known as elastic stop nuts, this self locking nut uses a nylon collar that resists turning.
- Serrations are angled to keep from rotating in the direction that would loosen the fastener.
- A4-80 stainless steel provides a minimum tensile strength of 800N/mm-2 (Mpa).
- Stainless steel significantly improves resistance to tarnishing or corrosion.
DIMENSIONAL ATTRIBUTES- Diameter (Nominal): M6
- Thread Pitch: 1.0
- Diameter (Dimension): 6mm
- Thread Length (Nominal): 5.7mm
- Across Flats (Basic): 10mm
- Across Flats (Minimum): 9.78mm
- Across Flats (Maximum): 10mm
- Height (Basic): 9.1mm
- Height (Minimum): 8.74mm
- Height (Maximum): 9.1mm
- Flange Diameter: 14.2mm
- Flange Thickness: 2.6mm
PRODUCT ATTRIBUTES- Category: Hex Nylon Insert Flange Stop Lock Nuts
- System of Measurement: Metric
- Brand: Aspen Fasteners®
- Form and Design: Locking Serrations
- Drive Style: External Hex Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Stainless Steel
- Material Grade: A4-80 Stainless Steel
- Coating: Uncoated
- Standards and Specifications: DIN 6926
Product UPC Code:
692559696720
- Across Flats (Minimum):
- 9.78mm
- Across Flats (Basic):
- 10mm
- Thread Length (Nominal):
- 5.7mm
- Height (Basic):
- 9.1mm
- Height (Maximum):
- 9.1mm
- Thread Pitch:
- 1.0
- Product Class:
- Internally Threaded Fasteners
- Diameter (Nominal):
- M6
- Height (Minimum):
- 8.74mm
- Diameter (Dimension):
- 6mm
- cad_3d_file_url:
- https://3d.aspenfasteners.com/assets/obj/ME554-610X91X142X10.zip
- Brand:
- Aspen Fasteners
- Form and Design:
- Locking Serrations
- Category:
- Hex Nylon Insert Flange Stop Lock Nuts
- Shop by Material:
- Stainless Steel
- Material:
- Stainless Steel
- Shop by System of Measurement:
- Metric
- specifications_document_url:
- https://www.aspenfasteners.com/content/2D_PDF/product38/ME554-610X91X142X10.PDF
- Drive Style:
- External Hex Drive
- Across Flats (Maximum):
- 10mm
- Thread Length:
- Full Thread
- Standards and Specifications:
- DIN 6926
- Flange Diameter:
- 14.2mm
- Flange Thickness:
- 2.6mm
- Material Grade:
- A4-80 Stainless Steel
- Order:
- Lock Nuts
- System of Measurement:
- Metric
- Thread Direction:
- Right-Hand Thread
- Coating:
- Uncoated
- cad_3d_viewer_url:
- https://3d.aspenfasteners.com/viewer/?cad_model=obj/ME554-610X91X142X10
- POS:
- ME554-610X91X142X10-000300
