- Also known as elastic stop nuts, this self locking nut uses a nylon collar that resists turning.
- The nylon insert collar retains its locking ability up to 250 degrees F (121 degrees C).
- Proof load 90,000 psi. minimum.
- Diameter (Nominal): 1-1/8"
- Thread Pitch: 7
- Diameter (Dimension): 1.125"
- Thread Length: 0.93"
- Across Flats (Basic): 1-5/8"
- Across Flats (Minimum): 1.614"
- Across Flats (Maximum): 1.627"
- Height (Basic): 1.203"
- Height (Minimum): 1.141"
- Height (Maximum): 1.203"
- Product Class: Internally Threaded Fasteners
- Order: Lock Nuts
- Category: Hex Nylon Insert Stop Lock Nuts
- System of Measurement: Inch
- Brand: Aspen Fasteners®
- Drive Style: External Hex Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Steel
- Material Grade: Low Carbon Steel
- Coating: Zinc Plated
- Coating Color: Clear
- Standards and Specifications: NM and NE Standard Series
- Standards and Specifications:
- NM and NE Standard Series
- Coating Color:
- Clear
- Coating:
- Zinc Plated
- Material Grade:
- Low Carbon Steel
- Material:
- Steel
- Thread Direction:
- Right-Hand Thread
- Thread Length:
- Full Thread
- Drive Style:
- External Hex Drive
- Order:
- Lock Nuts
- Category:
- Hex Nylon Insert Stop Lock Nuts
- System of Measurement:
- Inch
- Brand:
- Aspen Fasteners
- Shop by Material:
- Steel
- Shop by System of Measurement:
- Inch
- Thread Pitch:
- 7
- Thread Length:
- 0.93"
- Across Flats (Basic):
- 1-5/8"
- Across Flats (Minimum):
- 1.614"
- Across Flats (Maximum):
- 1.627"
- Height (Basic):
- 1.203"
- Height (Minimum):
- 1.141"
- Height (Maximum):
- 1.203"
- Product Class:
- Internally Threaded Fasteners
- Diameter (Dimension):
- 1.125"
- Diameter (Nominal):
- 1-1/8"
-
Description
- Also known as elastic stop nuts, this self locking nut uses a nylon collar that resists turning.
- The nylon insert collar retains its locking ability up to 250 degrees F (121 degrees C).
- Proof load 90,000 psi. minimum.
- Diameter (Nominal): 1-1/8"
- Thread Pitch: 7
- Diameter (Dimension): 1.125"
- Thread Length: 0.93"
- Across Flats (Basic): 1-5/8"
- Across Flats (Minimum): 1.614"
- Across Flats (Maximum): 1.627"
- Height (Basic): 1.203"
- Height (Minimum): 1.141"
- Height (Maximum): 1.203"
- Product Class: Internally Threaded Fasteners
- Order: Lock Nuts
- Category: Hex Nylon Insert Stop Lock Nuts
- System of Measurement: Inch
- Brand: Aspen Fasteners®
- Drive Style: External Hex Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Steel
- Material Grade: Low Carbon Steel
- Coating: Zinc Plated
- Coating Color: Clear
- Standards and Specifications: NM and NE Standard Series