- Holds an object in place via friction between the point of the screw and the fastened material.
- While similar to set screws with a hex recess drive, the square head allows for a wrench to be used.
- Square head set screws are also known as grub screws.
- Set screws are designed to be used under compressive stress only.
DIMENSIONAL ATTRIBUTES- Diameter (Nominal): 1/2"
- Thread Pitch: 13
- Diameter (Dimension): 0.5"
- Length (Nominal): 2-1/2"
- Thread Length (Nominal): 2.5"
- Across Flats (Basic): 0.5"
- Across Flats (Minimum): 0.484"
- Across Flats (Maximum): 0.5"
- Head Height, Overall (Minimum): 0.361"
- Head Height, Overall (Maximum): 0.389"
- Point Width (Minimum): 0.27"
- Point Width (Maximum): 0.291"
PRODUCT ATTRIBUTES- Category: Set Screws
- System of Measurement: Inch
- Brand: Aspen Fasteners®
- Head Style: Square Head
- Drive Style: External Square Drive
- Pitch: Coarse Thread
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Point: Flat Point
- Material: Steel
- Material Grade: Low Carbon Steel
- Material Processes: Case Hardened
- Coating: Uncoated
- Standards and Specifications: ASME B18.6.2
Product UPC Code:
698435902336
- Length (Nominal):
- 2-1/2"
- Brand:
- Aspen Fasteners(r)
- Product Class:
- Externally Threaded Fasteners
- Order:
- Machine Thread Fasteners
- Drive Style:
- External Square Drive
- Diameter (Nominal):
- 1/2"
- Thread Length:
- Full Thread
- Material:
- Steel
- Head Height, Overall (Maximum):
- 0.389"
- Head Style:
- Square Head
- Across Flats (Minimum):
- 0.484"
- Point Width (Maximum):
- 0.291"
- Thread Length (Nominal):
- 2.5"
- Material Processes:
- Case Hardened
- Across Flats (Maximum):
- 0.5"
- Shop by Material:
- Steel
- Shop by System of Measurement:
- Inch
- System of Measurement:
- Inch
- Head Height, Overall (Minimum):
- 0.361"
- Across Flats (Basic):
- 0.5"
- Standards and Specifications:
- ASME B18.6.2
- Category:
- Set Screws
- Thread Pitch:
- 13
- Coating:
- Uncoated
- Point:
- Flat Point
- Pitch:
- Coarse Thread
- Material Grade:
- Low Carbon Steel
- Point Width (Minimum):
- 0.27"
- Diameter (Dimension):
- 0.5"
- Thread Direction:
- Right-Hand Thread
