- Also known as elastic stop nuts, this self locking nut uses a nylon collar that resists turning.
- The nylon insert collar retains its locking ability up to 250 degrees F (121 degrees C).
- Proof load 90,000 psi. minimum.
- Diameter (Nominal): 3/8"
- Thread Pitch: 24
- Diameter (Dimension): 0.375"
- Thread Length: 0.15"
- Across Flats (Basic): 9/16"
- Across Flats (Minimum): 0.553"
- Across Flats (Maximum): 0.564"
- Height (Basic): 0.281"
- Height (Minimum): 0.251"
- Height (Maximum): 0.281"
- Product Class: Internally Threaded Fasteners
- Order: Lock Nuts
- Category: Hex Nylon Insert Stop Lock Nuts
- System of Measurement: Inch
- Brand: Aspen Fasteners®
- Drive Style: External Hex Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Steel
- Material Grade: Low Carbon Steel
- Coating: Zinc Plated
- Coating Color: Clear
- Standards and Specifications: NTM and NTE Thin Series
- Height (Maximum):
- 0.281"
- Height (Minimum):
- 0.251"
- Height (Basic):
- 0.281"
- Order:
- Lock Nuts
- Product Class:
- Internally Threaded Fasteners
- Thread Length:
- Full Thread
- Diameter (Nominal):
- 3/8"
- Diameter (Dimension):
- 0.375"
- Standards and Specifications:
- NTM and NTE Thin Series
- Drive Style:
- External Hex Drive
- Brand:
- Aspen Fasteners
- System of Measurement:
- Inch
- Category:
- Hex Nylon Insert Stop Lock Nuts
- Thread Pitch:
- 24
- Thread Length:
- 0.15"
- Across Flats (Basic):
- 9/16"
- Thread Direction:
- Right-Hand Thread
- Material:
- Steel
- Across Flats (Maximum):
- 0.564"
- Across Flats (Minimum):
- 0.553"
- Shop by Material:
- Steel
- Material Grade:
- Low Carbon Steel
- Coating:
- Zinc Plated
- Coating Color:
- Clear
- Shop by System of Measurement:
- Inch
-
Description
- Also known as elastic stop nuts, this self locking nut uses a nylon collar that resists turning.
- The nylon insert collar retains its locking ability up to 250 degrees F (121 degrees C).
- Proof load 90,000 psi. minimum.
- Diameter (Nominal): 3/8"
- Thread Pitch: 24
- Diameter (Dimension): 0.375"
- Thread Length: 0.15"
- Across Flats (Basic): 9/16"
- Across Flats (Minimum): 0.553"
- Across Flats (Maximum): 0.564"
- Height (Basic): 0.281"
- Height (Minimum): 0.251"
- Height (Maximum): 0.281"
- Product Class: Internally Threaded Fasteners
- Order: Lock Nuts
- Category: Hex Nylon Insert Stop Lock Nuts
- System of Measurement: Inch
- Brand: Aspen Fasteners®
- Drive Style: External Hex Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Steel
- Material Grade: Low Carbon Steel
- Coating: Zinc Plated
- Coating Color: Clear
- Standards and Specifications: NTM and NTE Thin Series