- Hex cap screws are manufactured to tighter tolerances as compared to hex bolts.
- Stainless steel significantly improves resistance to tarnishing or corrosion.
- The washer face under the head provides a precision bearing surface.
- The chamfered point improves engagement with a nut or pre-tapped hole.
DIMENSIONAL ATTRIBUTES- Diameter (Nominal): 5/8"
- Thread Pitch: 11
- Diameter (Dimension): 0.625"
- Diameter (Minimum): 0.617"
- Diameter (Maximum): 0.625"
- Length (Nominal): 1-1/2"
- Thread Length (Nominal): 1.5"
- Across Flats (Basic): 15/16"
- Across Flats (Minimum): 0.922"
- Across Flats (Maximum): 0.938"
- Head Height, Overall: 25/64"
- Head Height, Overall (Minimum): 0.378"
- Head Height, Overall (Maximum): 0.403"
PRODUCT ATTRIBUTES- Category: Cap Screws
- System of Measurement: Inch
- Brand: Aspen Fasteners®
- Head Style: Hex Head
- Head Style Detail: Washer Face
- Drive Style: External Hex Drive
- Thread Direction: Right-Hand Thread
- Point: Chamfered Point
- Material: Stainless Steel
- Material Grade: AISI 316L Stainless Steel
- Coating: Uncoated
- Standards and Specifications: ASME B18.2.1
Product UPC Code:
698435739468
- System of Measurement:
- Inch
- Material:
- Stainless Steel
- Category:
- Cap Screws
- Head Height, Overall:
- 25/64"
- Material Grade:
- AISI 316L Stainless Steel
- Shop by System of Measurement:
- Inch
- Drive Style:
- External Hex Drive
- Head Height, Overall (Maximum):
- 0.403"
- Thread Length (Nominal):
- 1.5"
- Coating:
- Uncoated
- Point:
- Chamfered Point
- Product Class:
- Externally Threaded Fasteners
- Diameter (Minimum):
- 0.617"
- Diameter (Maximum):
- 0.625"
- Across Flats (Minimum):
- 0.922"
- Shop by Material:
- Stainless Steel
- Order:
- Machine Thread Fasteners
- Head Style Detail:
- Washer Face
- specifications_document_url:
- https://www.aspenfasteners.com/content/2D_PDF/product78/ST314-5811X112.PDF
- POS:
- ST314-5811X112-000015
- Head Style:
- Hex Head
- Diameter (Nominal):
- 5/8"
- Across Flats (Maximum):
- 0.938"
- Length (Nominal):
- 1-1/2"
- Head Height, Overall (Minimum):
- 0.378"
- Standards and Specifications:
- ASME B18.2.1
- Brand:
- Aspen Fasteners
- Across Flats (Basic):
- 15/16"
- Thread Pitch:
- 11
- Diameter (Dimension):
- 0.625"
- Thread Direction:
- Right-Hand Thread
