- Holds an object in place via friction between the point of the screw and the fastened material.
- While similar to set screws with a hex recess drive, the square head allows for a wrench to be used.
- Square head set screws are also known as grub screws.
- Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners.
- Set screws are designed to be used under compressive stress only.
DIMENSIONAL ATTRIBUTES- Diameter (Nominal): 5/8"
- Thread Pitch: 11
- Diameter (Dimension): 0.625"
- Length (Nominal): 1-1/4"
- Thread Length (Nominal): 1.25"
- Across Flats (Basic): 0.625"
- Across Flats (Minimum): 0.606"
- Across Flats (Maximum): 0.625"
- Head Height, Overall (Minimum): 0.452"
- Head Height, Overall (Maximum): 0.485"
- Point Width (Minimum): 0.347"
- Point Width (Maximum): 0.371"
PRODUCT ATTRIBUTES- Category: Set Screws
- System of Measurement: Inch
- Brand: Aspen Fasteners®
- Head Style: Square Head
- Drive Style: External Square Drive
- Pitch: Coarse Thread
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Point: Cup Point
- Material: Steel
- Material Grade: Alloy Steel
- Material Processes: Through-Hardened
- Coating: Uncoated
- Hardness Rating: Rockwell C45-C53
- Standards and Specifications: ASME B18.6.2
Product UPC Code:
698435904972
- Diameter (Nominal):
- 5/8"
- Across Flats (Basic):
- 0.625"
- Pitch:
- Coarse Thread
- Point:
- Cup Point
- Thread Direction:
- Right-Hand Thread
- Coating:
- Uncoated
- Thread Length (Nominal):
- 1.25"
- Material:
- Steel
- Diameter (Dimension):
- 0.625"
- Category:
- Set Screws
- Point Width (Minimum):
- 0.347"
- Across Flats (Minimum):
- 0.606"
- Brand:
- Aspen Fasteners
- Hardness Rating:
- Rockwell C45-C53
- Shop by System of Measurement:
- Inch
- Across Flats (Maximum):
- 0.625"
- Length (Nominal):
- 1-1/4"
- Thread Pitch:
- 11
- Material Grade:
- Alloy Steel
- System of Measurement:
- Inch
- Order:
- Machine Thread Fasteners
- Drive Style:
- External Square Drive
- Head Style:
- Square Head
- Head Height, Overall (Minimum):
- 0.452"
- Point Width (Maximum):
- 0.371"
- Head Height, Overall (Maximum):
- 0.485"
- Product Class:
- Externally Threaded Fasteners
- Shop by Material:
- Steel
- Material Processes:
- Through-Hardened
- Thread Length:
- Full Thread
- Standards and Specifications:
- ASME B18.6.2
