- Also known as elastic stop nuts, this self locking nut uses a nylon collar that resists turning.
- The nylon insert collar retains its locking ability up to 250 degrees F (121 degrees C).
- 18-8 stainless steel is functionally interchangeable with type 304 stainless steel.
- Stainless steel significantly improves resistance to tarnishing or corrosion.
- Diameter (Nominal): 7/16"
- Thread Pitch: 20
- Diameter (Dimension): 0.4375"
- Thread Length (Nominal): 0.324"
- Across Flats (Basic): 5/8"
- Across Flats (Minimum): 0.616"
- Across Flats (Maximum): 0.627"
- Height (Basic): 0.468"
- Height (Minimum): 0.438"
- Height (Maximum): 0.468"
- Category: Hex Nylon Insert Stop Lock Nuts
- System of Measurement: Inch
- Brand: Aspen Fasteners®
- Drive Style: External Hex Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Stainless Steel
- Material Grade: 18-8 Stainless Steel
- Coating: Uncoated
- Standards and Specifications: NM and NE Standard Series
- Across Flats (Maximum):
- 0.627"
- Diameter (Nominal):
- 7/16"
- Diameter (Dimension):
- 0.4375"
- Thread Pitch:
- 20
- Thread Length (Nominal):
- 0.324"
- Across Flats (Basic):
- 5/8"
- Across Flats (Minimum):
- 0.616"
- Height (Basic):
- 0.468"
- Height (Minimum):
- 0.438"
- Height (Maximum):
- 0.468"
- Standards and Specifications:
- NM and NE Standard Series
- Coating:
- Uncoated
- Material Grade:
- 18-8 Stainless Steel
- Material:
- Stainless Steel
- Thread Direction:
- Right-Hand Thread
- Thread Length:
- Full Thread
- Drive Style:
- External Hex Drive
- Brand:
- Aspen Fasteners
- System of Measurement:
- Inch
- Category:
- Hex Nylon Insert Stop Lock Nuts
- Order:
- Lock Nuts
- Product Class:
- Internally Threaded Fasteners
- Shop by Material:
- Stainless Steel
- Shop by System of Measurement:
- Inch
- POS:
- ST026-71620-000400,ST026-71620-000600
-
Description
- Also known as elastic stop nuts, this self locking nut uses a nylon collar that resists turning.
- The nylon insert collar retains its locking ability up to 250 degrees F (121 degrees C).
- 18-8 stainless steel is functionally interchangeable with type 304 stainless steel.
- Stainless steel significantly improves resistance to tarnishing or corrosion.
- Diameter (Nominal): 7/16"
- Thread Pitch: 20
- Diameter (Dimension): 0.4375"
- Thread Length (Nominal): 0.324"
- Across Flats (Basic): 5/8"
- Across Flats (Minimum): 0.616"
- Across Flats (Maximum): 0.627"
- Height (Basic): 0.468"
- Height (Minimum): 0.438"
- Height (Maximum): 0.468"
- Category: Hex Nylon Insert Stop Lock Nuts
- System of Measurement: Inch
- Brand: Aspen Fasteners®
- Drive Style: External Hex Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Stainless Steel
- Material Grade: 18-8 Stainless Steel
- Coating: Uncoated
- Standards and Specifications: NM and NE Standard Series