- Unlike typical nuts, round nuts cannot be tightened using their external sides, or across flats.
- Tighten or loosen using a slot cut across the top surface of the round nut.
- A4 stainless steel is functionally equivalent to 316 grade and is also known as "marine grade".
- Stainless steel significantly improves resistance to tarnishing or corrosion.
- Diameter (Nominal): M10
- Thread Pitch: 1.5
- Diameter (Dimension): 10mm
- Thread Length: 8mm
- Outside Diameter (Nominal): 18mm
- Outside Diameter (Minimum): 17.57mm
- Outside Diameter (Maximum): 18mm
- Height (Basic): 8mm
- Height (Minimum): 7.64mm
- Height (Maximum): 8mm
- Slot Depth (Minimum): 3.2mm
- Slot Depth (Maximum): 3.7mm
- Slot Width (Nominal): 3.5mm
- Slot Width (Minimum): 3.57mm
- Slot Width (Maximum): 3.87mm
- Product Class: Internally Threaded Fasteners
- Order: Specialty Nuts
- Category: Round Nuts
- System of Measurement: Metric
- Brand: Aspen Fasteners®
- Drive Style: Slotted Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Stainless Steel
- Material Grade: A4 Stainless Steel
- Coating: Uncoated
- Standards and Specifications: DIN 546
Product UPC Code:
692559697840
- Slot Depth (Maximum):
- 3.7mm
- Thread Length:
- 8mm
- Standards and Specifications:
- DIN 546
- Thread Pitch:
- 1.5
- Material Grade:
- A4 Stainless Steel
- Height (Minimum):
- 7.64mm
- Drive Style:
- Slotted Drive
- Slot Width (Nominal):
- 3.5mm
- Material:
- Stainless Steel
- Slot Width (Maximum):
- 3.87mm
- System of Measurement:
- Metric
- Outside Diameter (Maximum):
- 18mm
- Outside Diameter (Minimum):
- 17.57mm
- Height (Maximum):
- 8mm
- Shop by System of Measurement:
- Metric
- Height (Basic):
- 8mm
- Diameter (Dimension):
- 10mm
- Diameter (Nominal):
- M10
- Thread Direction:
- Right-Hand Thread
- Brand:
- Aspen Fasteners(r)
- Order:
- Specialty Nuts
- Coating:
- Uncoated
- Product Class:
- Internally Threaded Fasteners
- Shop by Material:
- Stainless Steel
- Thread Length:
- Full Thread
- Category:
- Round Nuts
- Slot Depth (Minimum):
- 3.2mm
- Outside Diameter (Nominal):
- 18mm
- Slot Width (Minimum):
- 3.57mm
