- Grooved pins are a type of solid dowel pin with grooves running axially along their surface.
- Full length grooves firmly hold the pin in place to prevent any spinning.
- Parallel grooves offer a tighter fit but require higher insertion forces.
- Flat countersunk head screws sit flush with the surface of the material they are inserted into.
DIMENSIONAL ATTRIBUTES- Diameter (Nominal): M2
- Diameter (Dimension): 2mm
- Diameter (Minimum): 1.95mm
- Diameter (Maximum): 2mm
- Length (Nominal): 8mm
- Head Diameter: 3.5mm
- Head Diameter (Minimum): 3.3mm
- Head Diameter (Maximum): 3.7mm
- Head Height, Overall: 1mm
- Head Height, Overall (Minimum): 0.9mm
- Head Height, Overall (Maximum): 1.1mm
PRODUCT ATTRIBUTES- Category: Grooved Pins
- System of Measurement: Metric
- Brand: Aspen Fasteners®
- Form and Design: Full Length Parallel Groove
- Head Style: Flat Countersunk Head
- Head Style Detail: 75 Degree Countersink
- Material: Steel
- Material Processes: Unhardened
- Coating: Uncoated
- Standards and Specifications: DIN 1477 / ISO 8747
Product UPC Code:
698435839762
- Head Height, Overall (Minimum):
- 0.9mm
- Brand:
- Aspen Fasteners(r)
- Length (Nominal):
- 8mm
- Form and Design:
- Full Length Parallel Groove
- Category:
- Grooved Pins
- Product Class:
- Pins and Wireforms
- Diameter (Minimum):
- 1.95mm
- Material Processes:
- Unhardened
- Diameter (Maximum):
- 2mm
- Shop by Material:
- Steel
- Order:
- Dowel Pins
- Head Diameter:
- 3.5mm
- Shop by System of Measurement:
- Metric
- Head Diameter (Maximum):
- 3.7mm
- POS:
- ME679-2X8-002500
- Head Style:
- Flat Countersunk Head
- Head Height, Overall:
- 1mm
- Coating:
- Uncoated
- Head Style Detail:
- 75 Degree Countersink
- Standards and Specifications:
- DIN 1477 / ISO 8747
- Diameter (Dimension):
- 2mm
- Head Height, Overall (Maximum):
- 1.1mm
- System of Measurement:
- Metric
- Head Diameter (Minimum):
- 3.3mm
- Material:
- Steel
- Diameter (Nominal):
- M2
