- Unlike typical nuts, round nuts cannot be tightened using their external sides, or across flats.
- Tighten or loosen using a slot cut across the top surface of the round nut.
- Stainless steel significantly improves resistance to tarnishing or corrosion.
- Diameter (Nominal): M3
- Thread Pitch: 0.5
- Diameter (Dimension): 3mm
- Thread Length: 2.5mm
- Outside Diameter (Nominal): 6mm
- Outside Diameter (Minimum): 5.7mm
- Outside Diameter (Maximum): 6mm
- Height (Basic): 2.5mm
- Height (Minimum): 2.25mm
- Height (Maximum): 2.5mm
- Slot Depth (Minimum): 1mm
- Slot Depth (Maximum): 1.2mm
- Slot Width (Nominal): 1.2mm
- Slot Width (Minimum): 1.26mm
- Slot Width (Maximum): 1.51mm
- Product Class: Internally Threaded Fasteners
- Order: Specialty Nuts
- Category: Round Nuts
- System of Measurement: Metric
- Brand: Aspen Fasteners®
- Drive Style: Slotted Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Stainless Steel
- Material Grade: AISI 303 Stainless Steel (18-8)
- Coating: Uncoated
- Standards and Specifications: DIN 546
Product UPC Code:
692559697871
- Order:
- Specialty Nuts
- Diameter (Dimension):
- 3mm
- Height (Minimum):
- 2.25mm
- Height (Maximum):
- 2.5mm
- Outside Diameter (Minimum):
- 5.7mm
- Outside Diameter (Maximum):
- 6mm
- Thread Length:
- 2.5mm
- Product Class:
- Internally Threaded Fasteners
- System of Measurement:
- Metric
- Category:
- Round Nuts
- Diameter (Nominal):
- M3
- Thread Pitch:
- 0.5
- Outside Diameter (Nominal):
- 6mm
- Height (Basic):
- 2.5mm
- Drive Style:
- Slotted Drive
- Thread Length:
- Full Thread
- Thread Direction:
- Right-Hand Thread
- Material:
- Stainless Steel
- Material Grade:
- AISI 303 Stainless Steel (18-8)
- Coating:
- Uncoated
- Standards and Specifications:
- DIN 546
- Brand:
- Aspen Fasteners(r)
- Slot Depth (Minimum):
- 1mm
- Slot Depth (Maximum):
- 1.2mm
- Slot Width (Nominal):
- 1.2mm
- Slot Width (Minimum):
- 1.26mm
- Slot Width (Maximum):
- 1.51mm
- Shop by System of Measurement:
- Metric
- Shop by Material:
- Stainless Steel
