- Holds an object in place via friction between the point of the screw and the fastened material.
- While similar to set screws with a hex recess drive, the square head allows for a wrench to be used.
- Square head set screws are also known as grub screws.
- Class 8.8 steel is a tempered medium carbon steel with a minimum tensile strength of 800/mm-2 (Mpa).
- Set screws are designed to be used under compressive stress only.
DIMENSIONAL ATTRIBUTES- Diameter (Nominal): M6
- Thread Pitch: 1.0
- Diameter (Dimension): 6mm
- Length (Nominal): 30mm
- Thread Length (Nominal): 30mm
- Across Flats (Basic): 6mm
- Across Flats (Minimum): 5.82mm
- Across Flats (Maximum): 6mm
- Head Height, Overall: 6mm
- Head Height, Overall (Minimum): 5.85mm
- Head Height, Overall (Maximum): 6.15mm
- Point Length: 1.5mm
- Point Length (Minimum): 1.5mm
- Point Length (Maximum): 1.75mm
- Point Width: 4mm
- Point Width (Minimum): 3.82mm
- Point Width (Maximum): 4mm
PRODUCT ATTRIBUTES- Category: Set Screws
- System of Measurement: Metric
- Brand: Aspen Fasteners®
- Head Style: Square Head
- Drive Style: External Square Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Point: Half-Dog Point
- Material: Steel
- Material Grade: Class 8.8 Steel
- Coating: Uncoated
- Standards and Specifications: DIN 479
Product UPC Code:
692559476490
- Drive Style:
- External Square Drive
- Shop by System of Measurement:
- Metric
- Shop by Material:
- Steel
- Product Class:
- Externally Threaded Fasteners
- Order:
- Machine Thread Fasteners
- Category:
- Set Screws
- System of Measurement:
- Metric
- Brand:
- Aspen Fasteners(r)
- Head Style:
- Square Head
- Thread Length:
- Full Thread
- Thread Direction:
- Right-Hand Thread
- Point:
- Half-Dog Point
- Material:
- Steel
- Material Grade:
- Class 8.8 Steel
- Coating:
- Uncoated
- Standards and Specifications:
- DIN 479
- Diameter (Nominal):
- M6
- Diameter (Dimension):
- 6mm
- Thread Pitch:
- 1.0
- Length (Nominal):
- 30mm
- Thread Length (Nominal):
- 30mm
- Across Flats (Basic):
- 6mm
- Across Flats (Minimum):
- 5.82mm
- Across Flats (Maximum):
- 6mm
- Head Height, Overall:
- 6mm
- Head Height, Overall (Minimum):
- 5.85mm
- Head Height, Overall (Maximum):
- 6.15mm
- Point Length:
- 1.5mm
- Point Length (Minimum):
- 1.5mm
- Point Length (Maximum):
- 1.75mm
- Point Width:
- 4mm
- Point Width (Minimum):
- 3.82mm
- Point Width (Maximum):
- 4mm
