- Also known as elastic stop nuts, this self locking nut uses a nylon collar that resists turning.
- The nylon insert collar retains its locking ability up to 250 degrees F (121 degrees C).
- A4-80 stainless steel provides a minimum tensile strength of 800N/mm-2 (Mpa).
- Stainless steel significantly improves resistance to tarnishing or corrosion.
- Diameter (Nominal): M5
- Thread Pitch: 0.8
- Diameter (Dimension): 5mm
- Thread Length (Nominal): 3.2mm
- Across Flats (Basic): 8mm
- Across Flats (Minimum): 7.78mm
- Across Flats (Maximum): 8mm
- Height (Basic): 5mm
- Height (Minimum): 4.7mm
- Height (Maximum): 5mm
- Product Class: Internally Threaded Fasteners
- Order: Lock Nuts
- Category: Hex Nylon Insert Stop Lock Nuts
- System of Measurement: Metric
- Brand: Aspen Fasteners®
- Drive Style: External Hex Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Stainless Steel
- Material Grade: A4-80 Stainless Steel
- Coating: Uncoated
- Standards and Specifications: DIN 985
- Material Grade:
- A4-80 Stainless Steel
- Drive Style:
- External Hex Drive
- Diameter (Nominal):
- M5
- Material:
- Stainless Steel
- System of Measurement:
- Metric
- Category:
- Hex Nylon Insert Stop Lock Nuts
- Brand:
- Aspen Fasteners(r)
- Coating:
- Uncoated
- Diameter (Dimension):
- 5mm
- Standards and Specifications:
- DIN 985
- Thread Length:
- Full Thread
- Height (Maximum):
- 5mm
- Thread Direction:
- Right-Hand Thread
- Order:
- Lock Nuts
- Across Flats (Basic):
- 8mm
- Shop by System of Measurement:
- Metric
- Height (Basic):
- 5mm
- Product Class:
- Internally Threaded Fasteners
- Thread Length (Nominal):
- 3.2mm
- Shop by Material:
- Stainless Steel
- Across Flats (Minimum):
- 7.78mm
- Across Flats (Maximum):
- 8mm
- Thread Pitch:
- 0.8
- Height (Minimum):
- 4.7mm
-
Description
- Also known as elastic stop nuts, this self locking nut uses a nylon collar that resists turning.
- The nylon insert collar retains its locking ability up to 250 degrees F (121 degrees C).
- A4-80 stainless steel provides a minimum tensile strength of 800N/mm-2 (Mpa).
- Stainless steel significantly improves resistance to tarnishing or corrosion.
- Diameter (Nominal): M5
- Thread Pitch: 0.8
- Diameter (Dimension): 5mm
- Thread Length (Nominal): 3.2mm
- Across Flats (Basic): 8mm
- Across Flats (Minimum): 7.78mm
- Across Flats (Maximum): 8mm
- Height (Basic): 5mm
- Height (Minimum): 4.7mm
- Height (Maximum): 5mm
- Product Class: Internally Threaded Fasteners
- Order: Lock Nuts
- Category: Hex Nylon Insert Stop Lock Nuts
- System of Measurement: Metric
- Brand: Aspen Fasteners®
- Drive Style: External Hex Drive
- Thread Length: Full Thread
- Thread Direction: Right-Hand Thread
- Material: Stainless Steel
- Material Grade: A4-80 Stainless Steel
- Coating: Uncoated
- Standards and Specifications: DIN 985
